PMAG's & the .264 LBC / 6.5 Grendel

[ST42]

Just an FYI. I had a few 20 round PMAGS with me today while I was shooting my .264 LBC. I decided to try the PMAGS. I ran 100 rounds through them without issue. So they seem to work, at least for me.

 

[leadbullet]

Re: PMAG's & the .264 LBC / 6.5 Grendel

good to know, thanx, I'll have to try them now.

 

[Dustin U]

Re: PMAG's & the .264 LBC / 6.5 Grendel

Production ammo or reloads??? COAL??



Dustin U

Thank's BTW!!!

 

[ST42]

Re: PMAG's & the .264 LBC / 6.5 Grendel

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Dustin U</div><div class="ubbcode-body">Production ammo or reloads??? COAL??



Dustin U

Thank's BTW!!! </div></div>

I ran reloads @ 2.260" and factory Hornady 6.5's at 2.255" Worked like a charm for me.

 

[Crashnrondo]

Re: PMAG's & the .264 LBC / 6.5 Grendel

Did you run them full capacity? I have done the same with my 6.8 but only can get 5-6 rounds to work properly.

 

[ST42]

Re: PMAG's & the .264 LBC / 6.5 Grendel

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Crashnrondo</div><div class="ubbcode-body">Did you run them full capacity? I have done the same with my 6.8 but only can get 5-6 rounds to work properly. </div></div>

My bad. I should have clarified. I could run 10 rounds out of a 20 round mag. The Mag walls flex too much to allow any more than that.

 

[Yachtee]

Re: PMAG's & the .264 LBC / 6.5 Grendel

have you tried to shorten the spring a little bit? I am about to tackle converting pmags for 6.5 grendel. I am working out what king of springs I need to have made.

 

[MPFD]

Re: PMAG's & the .264 LBC / 6.5 Grendel

I have a 30 round P mag that also works with my Grendel but you can only put about 15 in it if you want it to cycle properly.