Powder IN-STOCK thread

Keep in mind on the AR brass, is you have no idear on the primer they have used. I bought a bunch of the Sig .270 stuff. Good brass, necks are thicker than Peterson and need an E27 vs a T2 mandrel too keep my neck tension. Took a high anneal code as well. Primer looks like a CCI200, but it's not. I took 10 cases, popped the primers and seated a 200 in them. Same charge etc and I was 18 FPS slower with a lower SD v's theirs.

Not unhappy at all, just a note to keep in mind.

Yep and on the flip side, I bought a ton of AAC factory primed 5.56 new brass from them and loaded 77smk precision loads for my AR and they hammered tiny groups.

So your point is very valid, you dont know what the primer is, but that doesnt mean they are bad. It just means you dont know.
 

Attachments

  • IMG_7004.jpeg
    IMG_7004.jpeg
    1.4 MB · Views: 12
  • Haha
Reactions: ARShooter91
  • Like
Reactions: Im2bent
Kicking myself in the ass for not buying every last one of these they had. What a steal @ $66 per 500ct box

5.56 CCI primed new brass

This stuff looks brand spanking new. No pull marks, nothing. And case guages perfectly. I grabbed 4000 and wish I grabbed 25k. The automated 1050 runs so fast and smooth with sized and primed brass...



 
Kicking myself in the ass for not buying every last one of these they had. What a steal @ $66 per 500ct box

5.56 CCI primed new brass

This stuff looks brand spanking new. No pull marks, nothing. And case guages perfectly. I grabbed 4000 and wish I grabbed 25k. The automated 1050 runs so fast and smooth with sized and primed brass...




What headstamp were these?