Thanks!! That was shot at 100 yards. The horizontal spread I feel was me. I was fighting some of my equipment that day. I’m hoping that comes back together now that I got the issue fixed.
Shot this weekend with the A2. Distance was 385 yards, 5 shot group, little to no wind, 1.8” center of impact to center of impact. I’ll take this with a 16” 308 all day long. Hoping to get it out to 800 this week.
Attachments
My 284 i have taken out once at 200 yard the day i bought it. The 2 oz trigger is a little to get use to and one of this 5 shot group i set off on accident, still only about 5/8". The electroinic target is last season 1000 yard fclass with my savage 6.5 creedmoor.
Attachments
If the first part of your message is directed at me, then all three rifles are solid sub moa shooters. The Tikka used to be mine, I have shot more than a few .5 MOA groups with it, and steel out to 800 meters. The Remington in the middle has been my main rifle for the last 3 years, it shoots bugholes on occations, but mainly its a .5-.7 MOA gun since it has had over 2200 round through that barrel. I have shot steel out to 1000 meters with it. The TRG is new to my friend who has it. It has not been outside of the 300 meters range where the photos are taken, yet.
Very nice to what is actually going on out there. You guys can shoot. My Thompson Center LLR 6.5 Creedmoor. shoots 5 shot sub .3 MOA all day. The only problem this rifle has is the nut behind it. Some days he can't hold a 1MOA.
Ok, try not to drool over this sweet optic and fore/aft bipod setup.
But no, that was just a buddy of mine and I messing around above. Here are a few good ones. Amazing I haven't taken any of it while fielded. I probably should. I don't particularly like firearms pictures taken in the house. Just not a good background.
It is wearing the S&B 5-25x MSR now instead of the TT 5-25x H59. I wanted that TT on my AXMC.
It is wearing the S&B 5-25x MSR now instead of the TT 5-25x H59. I wanted that TT on my AXMC.
I know its not a true clone build, but it is as close as I can get it for a resonable amount of money (by no means cheap).
My Mk 13 mod5 (-ish) build, probably the only one of its kind in Sweden:
Remington 700 LA, RR prefix full blueprint.
Accuracy international AT chassis.
Remington MARS rail.
Jury custom barrels, MK13 mod 5 profile, with Stalon Victor L suppressor.
Nightforce NXS 5.5-22x56 scope.
Nightforce Ultralight rings.
Harris Bipod.
Leather competition sling.
My Mk 13 mod5 (-ish) build, probably the only one of its kind in Sweden:
Remington 700 LA, RR prefix full blueprint.
Accuracy international AT chassis.
Remington MARS rail.
Jury custom barrels, MK13 mod 5 profile, with Stalon Victor L suppressor.
Nightforce NXS 5.5-22x56 scope.
Nightforce Ultralight rings.
Harris Bipod.
Leather competition sling.
Last edited:
This took 7 years and help from the best people on earth who are fellow match shooters. I have to say thank you to Doug, Patrick and my wife who actually didn't give me any shit on this and all of the PRS shooters who are the best people I know for helping me find and build my Eleanor.
Badger Ordnance M2013
6X47 Lapua / .223 trainer
Manners T5A
Kahles k624i
Last edited:
GAP Hospitaller .308. Sig 7.62 suppressor. Shooting FGMM 168 SMK at 100 yards.
Vortex 4-16 FFP mil/mil
Just got the rifle back from getting the barrel threaded and had to re-zero the scope. The group in the diamond is my first group after getting zeroed with the Little Bastard brake mounted. The bottom group is with the can mounted. It shot 1.5 inches low, but no lateral deviation.
Vortex 4-16 FFP mil/mil
Just got the rifle back from getting the barrel threaded and had to re-zero the scope. The group in the diamond is my first group after getting zeroed with the Little Bastard brake mounted. The bottom group is with the can mounted. It shot 1.5 inches low, but no lateral deviation.
I love my new rifle!
6.5 Creedmoor
McMillan A10 stock
Spartan Rifles Gunsmithing
Curtis Custom Vector Action
Hawk Hill Barrel
MPA Muzzle break
Spartan Rifles Bottom Dweller bottom metal
Triggertech Diamond
Ingenuity Gunworks Adjustarail
Warne Skyline Bipod
Nightforce ATACR 5-25x
Warne Skyline Scope mount, level, and dope card holder
Had this action sitting in the safe the last 5 years and decided it was time..!
Defiance Rebel 6mm dasher
Defiance Rebel 6mm dasher
Love that build how do you like the M2013?
There is no Tempest long action unfortunately. I have this 300 PRC build floating around in the back of my head and something tells me i wanna go LA M2013, KMW Sentinel, 28" bartlein heavy palma, and launch some 250gr A-tips as far as i can lol.
Haven't had a new rifle in at least 5 months....
never ever had a 6.5, always wanted a carbon barrel, need a long range fox & small deer rifle.
The bits are coming together. Hardy carbon barrel will finish at 20", as is the barrel weighs 1.2kg (42 Oz). Action is an old remmy. She will get a Triggertech trigger and see if I can get a hold of the new Spuhr rails. Stock will be an Ultralight experimental PSE E-Tac4RSA … see if we get it under 30 Oz. Atlasworx floor AICS mag system.
edi
never ever had a 6.5, always wanted a carbon barrel, need a long range fox & small deer rifle.The bits are coming together. Hardy carbon barrel will finish at 20", as is the barrel weighs 1.2kg (42 Oz). Action is an old remmy. She will get a Triggertech trigger and see if I can get a hold of the new Spuhr rails. Stock will be an Ultralight experimental PSE E-Tac4RSA … see if we get it under 30 Oz. Atlasworx floor AICS mag system.
edi
Last edited:
I love the action more then anything other action I have had. It like a potatoe chip action once you eat one you cant stop and wont run anything else. It is a beast and heavy but heavy steady
Nice! I might have one too ?
Sweet. You won't be disappointed!
It might be a bit hard to get a licence for one in Europe, but we'll see.
Kimber LPT 308 and Remington 700 custom in 30-06 both less then 1/2 moa
Attachments
Stick with one stock design for range use, top to bottom,
KMW, 300NM, defiant action, 1:9 Krieger, 5-40 March, Ivey adj. base, Ase Alta supressor
KMW, carbon fibre, 6.5x47, Old Surgeon (pre.sell out), 1:8 Benchmade, 3-24x53 March, Ase Alta
KMW home brew - 22rf, Annie MPR in barrel block, BR March, Harrel tuner.
Finally my 60th birthday present to me, Shultz & Larsen Victory in 6.5x47, wood upgrade, Leica Magnus scope -very accurate deer rifle.(supressor omitted)
KMW, 300NM, defiant action, 1:9 Krieger, 5-40 March, Ivey adj. base, Ase Alta supressor
KMW, carbon fibre, 6.5x47, Old Surgeon (pre.sell out), 1:8 Benchmade, 3-24x53 March, Ase Alta
KMW home brew - 22rf, Annie MPR in barrel block, BR March, Harrel tuner.
Finally my 60th birthday present to me, Shultz & Larsen Victory in 6.5x47, wood upgrade, Leica Magnus scope -very accurate deer rifle.(supressor omitted)
With original stainless barrell ?
Ulr Mirage 6.5 CM Valdafa G2. 8 consecutive hits at 500 yards on a 1.5x4 inch target.
6CM 26” heavy contour barrel from Prometheus Arms
Surgeon short action
Trigger Tech Special
MPA chassis
Schmidt and Bender PM2 5-25
Atlas PRS with Arca adapter
Surgeon short action
Trigger Tech Special
MPA chassis
Schmidt and Bender PM2 5-25
Atlas PRS with Arca adapter
Here are a few rifles we just finished up at the APO shop!
The Multi-Cam is a SABER M700 Custom with a Proof Research 17" Carbon Fiber barrel with an AAC Blackout muzzle brake in the Light weight MRCA-AR that is has custom lighting cuts and Hydro Dip from the guys at Adaptive Graphx.
The other 3 rifles are the Sniper's Hide Training rifles! If this is not the right place to post this please take it down or let me know where it should be. Thanks
The Multi-Cam is a SABER M700 Custom with a Proof Research 17" Carbon Fiber barrel with an AAC Blackout muzzle brake in the Light weight MRCA-AR that is has custom lighting cuts and Hydro Dip from the guys at Adaptive Graphx.
The other 3 rifles are the Sniper's Hide Training rifles! If this is not the right place to post this please take it down or let me know where it should be. Thanks
Attachments
Axisworks 6.5 Creedmoor
surgeon 591 SA RH
Benchmark 3 groove @ 26" threaded 5/8-24
jewel trigger set @ 1.0 lbs
MPA competition chassis with weight kit
surgeon 591 SA RH
Benchmark 3 groove @ 26" threaded 5/8-24
jewel trigger set @ 1.0 lbs
MPA competition chassis with weight kit
nice! I just need to get a weight kit
Fully built by accurate ordnance
Stiller tac30 aw
Yes another 6.5 creed.
24” rock creek barrel
Surefire 762 brake
Apa bolt knob
Manners mcs T3 stock with mini chassis, and badger efr rail. Desert sage camo
Atlas bt10 bipod atlas bipod rail
Triad tactical stock pack.
Arc 32mm high rings.
Gen2 razor 4.5-27 ebr 2c reticle.
New scope purchased last week.
Leupold mark5 7-35 h59 sitting in vortex rings.
Pictures over the last year from a couple of outings.
Stiller tac30 aw
Yes another 6.5 creed.
24” rock creek barrel
Surefire 762 brake
Apa bolt knob
Manners mcs T3 stock with mini chassis, and badger efr rail. Desert sage camo
Atlas bt10 bipod atlas bipod rail
Triad tactical stock pack.
Arc 32mm high rings.
Gen2 razor 4.5-27 ebr 2c reticle.
New scope purchased last week.
Leupold mark5 7-35 h59 sitting in vortex rings.
Pictures over the last year from a couple of outings.
Attachments
-
3B20575D-3723-4D13-B6C8-1ADE77B50965.jpeg -
7B1026E9-B323-43B2-A250-3575172032A8.jpeg -
65BFFF00-E0B6-4DA1-8B12-DEC185EF3ABA.jpeg -
5EB36098-6215-437D-A1F0-D2E82C91F733.jpeg -
76DEC17E-6305-4D7C-9E00-1648391A0CF8.jpeg -
DE16E089-263B-46AE-A626-771E2BEE989F.jpeg -
4B35AF97-3534-4BB6-8D00-8817F401D61A.jpeg -
3A94A311-557B-49F4-AC1B-1B3A4BC5E319.jpeg
