That McWalnut is awesome!
Out at the range the other day... I really like shooting 6.5PRC. And I ended up picking a buddies 6mm the other day, I love this rifle, it is what my 300 Norma is being cosmeticly modeled after, when he talked about selling it I jumped on it.... I think I am done buying rifles for the year.
Attachments
Here are a few rifles I’ve put together over the last couple years.
Remington 700 .308 win
Remington 700 6.5 creedmore
Savage 110 .338 lapua
All have mcgowen barrels and McMillan A-5’s
Just finished up my first bolt action rifle. Gotta say I'm pretty stoked!
Impact Precision Action
Proof Research Stainless Barrel - 1:8, 24"
Triggertech Diamond
MPA BA Chassis
Spuhr Scope Mount
Leupold MK5 3.6-18 w/ CCH reticle
Atlas Bipod
Dead Air Sandman S w/ Cole-Tac cover
Impact Precision Action
Proof Research Stainless Barrel - 1:8, 24"
Triggertech Diamond
MPA BA Chassis
Spuhr Scope Mount
Leupold MK5 3.6-18 w/ CCH reticle
Atlas Bipod
Dead Air Sandman S w/ Cole-Tac cover
Yes you can. I just dropped my 6mm-06 in this Magpul, torqued it down and was good to go.
Just finished this up...
6.5PRC
Bighorn Origin Action
Proof 22"CF Barrel
APA CHODE Brake
TT Special
KRG Bravo
Seekins Rings
NF NXS 3.5-15F1
6.5PRC
Bighorn Origin Action
Proof 22"CF Barrel
APA CHODE Brake
TT Special
KRG Bravo
Seekins Rings
NF NXS 3.5-15F1
My 6.5 Creedmoor.
Howa Action
30” Brux 1:8 LV
Jard trigger
Warrior Gen4 Chassis
Nightforce ATACR 7-35x56 MILC
284 Shehane
30” Krieger HV
BAT M Action
Bix n Andy trigger
Joe West stock
Nightforce ATACR 7-35x56 MILc
Howa Action
30” Brux 1:8 LV
Jard trigger
Warrior Gen4 Chassis
Nightforce ATACR 7-35x56 MILC
284 Shehane
30” Krieger HV
BAT M Action
Bix n Andy trigger
Joe West stock
Nightforce ATACR 7-35x56 MILc
I pulled a tore up copper jacket out of my load development target that I thought was a flyer!
Just put my first LR rig together!
Defiance Deviant Tactical LH in 7RM w/ 30MOA rail
McMillan ADJ-A6 w/ ghost flame pattern
Nightforce ATACR F1 7-35 MIL-XT in Seekins rings
Krieger 28” bbl 1:8.5/M24
Bix n' Andy TacSport Pro trigger @ 14oz
APA RTG bottom metal w/ CIP length mag well/mags
Atlas-CAL
SAS Arbiter (9”) w/ Rifles Only MAD
Defiance Deviant Tactical LH in 7RM w/ 30MOA rail
McMillan ADJ-A6 w/ ghost flame pattern
Nightforce ATACR F1 7-35 MIL-XT in Seekins rings
Krieger 28” bbl 1:8.5/M24
Bix n' Andy TacSport Pro trigger @ 14oz
APA RTG bottom metal w/ CIP length mag well/mags
Atlas-CAL
SAS Arbiter (9”) w/ Rifles Only MAD
You may have some hoarding issues...…...
19 boxes of 338 lapua magnum cases behind something that isn't a 338 lapua. Where is the rest of it?
Boxes are for the theme
.Got the boxes from a friend, i do have few full 260rem and 6.5creedmoor Lapua case box though, but did not put them
in to the picture, because the box size is smalle.
I hope this is good for the answer to you?
Figured something like that. Shoulda put a winky smiley in previous message. Was messing with you.Boxes are for the theme
Got the boxes from a friend, i do have few full 260rem and 6.5creedmoor Lapua case box though, but did not put them
in to the picture, because the box size is smalle.
I hope this is good for the answer to you?
Btw your rifles look great! Especially the Whiskey 3's. The only way to make them better is if they were left handed and stainless.
Impact Precision action
6 bra
26” Krieger barrel
Mpa comp stock
Triggertech diamond
6 bra
26” Krieger barrel
Mpa comp stock
Triggertech diamond
Figured something like that. Shoulda put a winky smiley in previous message. Was messing with you.
Btw your rifles look great! Especially the Whiskey 3's. The only way to make them better is if they were left handed and stainless.
Thanks buddy
First PR here and new to the practice. I've shot 3-gun for 10 years but have always had an interest in shooting 1000-1200 yds.
I finally sent first rounds down range last Sunday. First 5 shots got her dialed in at 100 and the next 5 yielded a decent. 435" group.
Bergara HMR Pro 6.5CM
Seekins base and rings
Vortex PST Gen II 5-25
I finally sent first rounds down range last Sunday. First 5 shots got her dialed in at 100 and the next 5 yielded a decent. 435" group.
Bergara HMR Pro 6.5CM
Seekins base and rings
Vortex PST Gen II 5-25
Attachments
Last edited:
338 Norma Magnum
Defiance Machine Deviant action
Bartlein HV barrel - 27" @ 9.3" twist
Grayboe Renegade stock
T3 brake
Leupold Mark 5HD 5-25 w/ H59 reticle
Got another new rifle.
Impact 6 creedmoor, action/barrel from Impact
Impact brake
KRG bravo stock
Accutac bipod
Kahles 6-24 scope
Accumag
Now I gotta go to the range and get some rounds through it!
Impact 6 creedmoor, action/barrel from Impact
Impact brake
KRG bravo stock
Accutac bipod
Kahles 6-24 scope
Accumag
Now I gotta go to the range and get some rounds through it!
I took my new 6 BRA out to the eastern slopes of the Sierras last weekend. I found my new favorite shooting spot...
Where I went shooting - only fired the 6mm at 700 yards, as I'm not through load dev yet, but had my 300 out to 1430:
Rifle:
6mm BRA
Deviant action
Bartlein 26" 1-7.5
APA Lil B brake
Manners PRS2 stock
MPA one-piece mount
Vortex Razor Gen 2
Spartan Precision bottom metal
Where I went shooting - only fired the 6mm at 700 yards, as I'm not through load dev yet, but had my 300 out to 1430:
Rifle:
6mm BRA
Deviant action
Bartlein 26" 1-7.5
APA Lil B brake
Manners PRS2 stock
MPA one-piece mount
Vortex Razor Gen 2
Spartan Precision bottom metal
The Mk13 mod5(ish) on the range on a late summer evening in the south of Sweden.
300 winmag.
Blueprinted Remington 700.
Jury custom barrels, Mk13mod5 profile.
AICS AT chassie.
MARS rail.
Nightforce NXS 5.5-22x56 with Ultralite rings.
300 winmag.
Blueprinted Remington 700.
Jury custom barrels, Mk13mod5 profile.
AICS AT chassie.
MARS rail.
Nightforce NXS 5.5-22x56 with Ultralite rings.
A Team Precision built.
Begara action
Hawk Hill barrel
Triggertech trigger
Manners t4a stock
Apa little bastard brake
Seeking rings
Burris xtrll 4-20
Begara action
Hawk Hill barrel
Triggertech trigger
Manners t4a stock
Apa little bastard brake
Seeking rings
Burris xtrll 4-20
Great rifle. I had almost the exact same setup - only it was 6CM. I sold it when I got my 6BRA because it was too similar, but I recommend it to anyone who is looking for something in that price range.
Thank you.
Rem 700 sps tactical 308
Krg whisky 3
Timney Calvin elite 2 stage trigger set at 1.5lb
Nightforce atacr 7-35-56 f1 mil-c
Spuhr qdp 4602 mount. (A little tall for this rig. Bought for a tikka t3x tac a1 6.5 coming in the near future)
Atlas BT65 LW17 bipod.
Krg whisky 3
Timney Calvin elite 2 stage trigger set at 1.5lb
Nightforce atacr 7-35-56 f1 mil-c
Spuhr qdp 4602 mount. (A little tall for this rig. Bought for a tikka t3x tac a1 6.5 coming in the near future)
Atlas BT65 LW17 bipod.
I haven't shot there but by the looks that would be my favorite shooting place too, far drive for me though. Worth it.
What a great out of the box setup.First PR here and new to the practice. I've shot 3-gun for 10 years but have always had an interest in shooting 1000-1200 yds.
I finally sent first rounds down range last Sunday. First 5 shots got her dialed in at 100 and the next 5 yielded a decent. 435" group.
Bergara HMR Pro 6.5CM
Seekins base and rings
Vortex PST Gen II 5-25
It's a far drive for me too - about 4 hours. But I've got a couple friends who are crazy enough to head out at 6:00 am, spend a full day, and get back home after midnight. And yes, it's worth it.
I also have a bunch of friends who don't think it's worth it. They simply don't get it
This weekend @lowlight got to shoot my rifle. I'm still digging the Nucleus action, Huber trigger, and Magpul Pro 700 chassis.
Ok, now my first real custom work has begin, or it has got the custom barrel from USA
Krieger barrel stainless steelm 4 groove 1/8" and 6.5mm.
Remington varmint progfile.
It will be 6.5creedmoor, i know it is a puff caliber, i have all ready 260rem, but i like that accuracy on the 6.5 creedmoor, not that
my 260rem would not be accurate.
Tikka T3X action.
KRG Whiskey folding stock.
Spuhr mount, scope for this rifle i am not sure yet, what it will get, i have few plans.
Trigger is also open, i have few good options.
Here is the shaft, it arrived yesterday.
Krieger barrel stainless steelm 4 groove 1/8" and 6.5mm.
Remington varmint progfile.
It will be 6.5creedmoor, i know it is a puff caliber
, i have all ready 260rem, but i like that accuracy on the 6.5 creedmoor, not thatmy 260rem would not be accurate.
Tikka T3X action.
KRG Whiskey folding stock.
Spuhr mount, scope for this rifle i am not sure yet, what it will get, i have few plans.
Trigger is also open, i have few good options.
Here is the shaft, it arrived yesterday.
Left: Tikka Action/Factory trigger
Proof Stainless M24 in 6.5Creed
Manners T4A/CDI
Bushnell DMR II/ARC M10’s
Right: Curtis Vector/TriggerTech Special
Proof Stainless Heavy Palma in 6Creed
KRG Bravo
Bushnell DMR II/ARC M10’s
Are those ARC Low Rings? 24mm/0.94"
On the Vector, yes... and I wish I would have gone Mediums like with the Tikka, as I cannot get scope caps on. Might be looking to see if someone wants to trade.
What kinda scope caps? Butler Creek? Looks like you have room to put it on, but difficult to tell from photo...and the fact that you said you couldn't lol.
20MOA rail on the Vector?
I ask because i ordered a Terminus Zeus with 30moa rail. Planning to use either 3-18 razor HD Gen2 or possibly 4-20 ZCO. Low rings look nice but useless if it don't fit.
Also plan on using MTU bbl profile...so i may need to go medium or Spuhr mount.
I would definitely go mediums. I cannot get butler creek to go on at all. But, you may still be close with a 30moa rail, and an MTU.
I run a Spuhr 1.18 and that's about as low as I would go with a 56mm obj
