Rifle Scopes Premier "Hunter" Scope

[Duc]

I have managed to lose the instructions for a Premier Hunter Scope and am hoping someone can tell me how to set the windage and elevation knobs back to zero once the Rifle has been zeroed.

Thanks, Duc

 

[Kruger21]

With a little flat blade screw driver loosen the lock screw that will allow the marked lower ring to spin to zero without turret moving! Its a fiddly process

 

[knockemdown]

Yep.
With the set screw loose, adjust the numbered ring part ONLY... it spins below the knurled portion at the top of the covered turret.

 

[Duc]

Thanks. I did loosen the screw...but the ring, while loose, still refuses to rotate. Will try some more!