Press for 375 cheytac

[padfoot 37]

Apologize if its been covered already, I have a rcbs rebel press im using for my 338lm and other rounds, at some point i would like to get into bigger rifles like the 375ct but cant seem to find if this press will load that. Thanks for you time, my googling hasnt come up with an answer.

 

[Marinevet1]

Heavy Präzipress 140mm – Turban CNC – Zerspanungstechnik

turban-shop.de

I've got one of their 120 mm presses........I think this one will handle the .375, if it doesn't, they make a larger one, 150 mm...........great press.......single stage.........email them ............credit card transaction........EZPZ..........

 

[Yerman]

Talon

PRESSE/RELOADING PRESS | talonadvanced

www.talonadvanced.com

 

[Dogtown]

I used an RCBS Ammomaster and later a Redding Ultramag for the Cheytac cases. That case family is in an intermediate size where most presses where you can comfortably load .338LM, you can uncomfortably load Cheytac. Using the bigger .50BMG scale presses to load Cheytac cases feels like load .308WIN in a Rockchucker.

Sometimes the biggest limitation with normal presses isn’t the height of the loading window; it’s the ability to easily use 1-1/4” dies.

 

[TreyMeTrey]

I used an RCBS Ammomaster and later a Redding Ultramag for the Cheytac cases. That case family is in an intermediate size where most presses where you can comfortably load .338LM, you can uncomfortably load Cheytac. Using the bigger .50BMG scale presses to load Cheytac cases feels like load .308WIN in a Rockchucker.

Sometimes the biggest limitation with normal presses isn’t the height of the loading window; it’s the ability to easily use 1-1/4” dies.

I just had a 375 Cheytac built and if I buy a press to handle it all,...Which one would you recommend?

 

[prebancolt]

Another option.

Lee Classic Cast 50 BMG Single Stage Reloading Press Kit

This single stage press has a rigid, cast iron "O" frame with a large opening and 4" ram stroke. The powerful compound linkage has a...

www.midwayusa.com

 

[TreyMeTrey]

Another option.

Lee Classic Cast 50 BMG Single Stage Reloading Press Kit

This single stage press has a rigid, cast iron "O" frame with a large opening and 4" ram stroke. The powerful compound linkage has a...

www.midwayusa.com

Ok. One man told me rcbs Summit.Ive never loaded any 375. I just have the dies and know they wont fit my any of 4 presses .

 

[TreyMeTrey]

H

Another option.

Lee Classic Cast 50 BMG Single Stage Reloading Press Kit

This single stage press has a rigid, cast iron "O" frame with a large opening and 4" ram stroke. The powerful compound linkage has a...

www.midwayusa.com

ow much clearance is needed ? Anyidea?

 

[prebancolt]

Not sure about the 375. I have the above press just in case I want to start playing with the 50. I have sized cases only with Imperial sizing wax, and it's not that big of a deal. I have done 338 LM, and they're easy, plenty of space.

It's so beefy, that I tend to use it for sizing vs my other presses.

As far as table clearance, my 550 takes up more space.

 

[TreyMeTrey]

ok.

Not sure about the 375. I have the above press just in case I want to start playing with the 50. I have sized cases only with Imperial sizing wax, and it's not that big of a deal. I have done 338 LM, and they're easy, plenty of space.

It's so beefy, that I tend to use it for sizing vs my other presses.

Thank you.

 

[sodakhunter]

Havent tried it but i believe the Area 419 Zero press will work.

 

[Beefmanne]

I run a RCBS Rockchucker Supreme.

 

[TreyMeTrey]

I run a RCBS Rockchucker Supreme.

with the RCBS Rockchucker Supreme can you set the brass and bullet straight in or do you have to tilt it into the seating die before seating the new bullet?

 

[wooferocau]

Simplex Magnum Press...158mm stroke.. 375CT with 407 Berger VLD in pic..

 

[wooferocau]

The LEE press has bugger all throat clearance!!

 

[TreyMeTrey]

Simplex Magnum Press...158mm stroke.. 375CT with 407 Berger VLD in pic..

Thank you.. I like that. Thats the type of press. I want to buy. Where did you purchase it and about how much if you dont mind?

 

[wooferocau]

375 Hellfire Case in press

 

[wooferocau]

They are made here in Australia.......Approx AUD $1050 very well made and substantial press..

 

[HemiPowrd]

Havent tried it but i believe the Area 419 Zero press will work.

From the Area419 description on the Zero press capacity:

The opening in the press will allow for sizing and seating of cases up to 338LM, and will accept standard 7/8″ dies and standard shellholders (we prefer the Redding). The press CAN be used for Cheytac-class reloading, but may (depending on your die setup and bullet length) require you to “scoop” the bullet into the sizing die and down into the case before sizing.

In the above quote, I think they meant to say Seating instead of Sizing.

 

[TreyMeTrey]

From the Area419 description on the Zero press capacity:


In the above quote, I think they meant to say Seating instead of Sizing.

Thank you. That SCOOPING up into the seating die part is the thing I'm trying to avoid. Thanks for the information

 

[Beefmanne]

with the RCBS Rockchucker Supreme can you set the brass and bullet straight in or do you have to tilt it into the seating die before seating the new bullet?

Tilt it when putting it in

 

[Yerman]

I just had a 375 Cheytac built and if I buy a press to handle it all,...Which one would you recommend?

I put a link at the top of this thread ^^^

 

[acudaowner]

with one jig to hold the case and another to hold the die twist and press only as percise as you want it to be and without a huge price tag .