Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Usin the nosler reload book. An these were once fired brassReduce your powder charge a lot. What is your data source?
edit: that shows up as a max load on the Nosler website. You should always start lower, say 10%, and work up. Also if this is virgin brass it may not have full capacity yet.
Use it better.Usin the nosler reload book. An these were once fired brass
This is snipers hide, if you’re not at 80k psi, you’re just not trying hard enough!“Hey, my shits way over pressure. Any advice?”
uhhhhhhh yeah. Quit loading it so hot.
Use it better.
View attachment 7439513
Thanks for your sarcasm“Hey, my shits way over pressure. Any advice?”
uhhhhhhh yeah. Quit loading it so hot.
Use it better.
View attachment 7439513
Shot factory hornady ammo an it does it to about half the rounds. Shot nosler factory ammo an those are all goodReduce your powder charge a lot. What is your data source?
edit: that shows up as a max load on the Nosler website. You should always start lower, say 10%, and work up. Also if this is virgin brass it may not have full capacity yet.
Is this a new gun? Has it done this before? Do you know if the headspace is correct, and the freebore not unusually short? Could you have a carbon ring that is increasing pressure?Shot factory hornady ammo an it does it to about half the rounds. Shot nosler factory ammo an those are all good
Yes sir the gun is new.Is this a new gun? Has it done this before? Do you know if the headspace is correct, and the freebore not unusually short? Could you have a carbon ring that is increasing pressure?
Im kinda new to this stuff sorry for the dumb questions. LolYes sir the gun is new.
You do understand you came on here and pulled your pants down?Thanks for your sarcasm
Yes went straight to 78 grains. I guess i will back it down a bit. An i did order some Peterson brass. Just waiting for them in the mailWhen you loaded them up, did you go straight to 78 grains? How fast is it going? Have you tried backing the charge off or going to a slower powder?
I always thought Nosler brass was mediocre. Peterson to the rescue.
![]()
28 Nosler
The 28 Nosler is a great long-distance big-game caliber that takes advantage of the newer, high BC, 7mm bullets.www.petersoncartridge.com
Its goin 3119 fpsYes went straight to 78 grains. I guess i will back it down a bit. An i did order some Peterson brass. Just waiting for them in the mail
As you now know, that’s just a bad practice. Peterson brass usually has a little less capacity than typical domestic brass. You would have been in a worse situation if you’d started with it at max charge. If I’m loading up something I’ve never loaded before, new wildcat, etc, I’ll load up a ladder in one grain increments. Usually it’s 5-7 rounds. Use them to zero, get velocities, and maybe run into pressure. Then go home and load up some safe charges to group with.Yes went straight to 78 grains. I guess i will back it down a bit. An i did order some Peterson brass. Just waiting for them in the mail