I'd like to hear from anyone who has experience with the PRI carbon forearm. I'm having an AR-10 built and I really prefer round handguards over the 4 rail guards. Also does anybody else make round forearms for an AR-10 type rifle.
PRI carbon forearm
- Thread starter jason8251
- Start date
Re: PRI carbon forearm
Mega Arms do a monolithic upper with a round forearm (the MTS model) but I'm not sure if it would fit an AR10.
Mega Arms do a monolithic upper with a round forearm (the MTS model) but I'm not sure if it would fit an AR10.
Re: PRI carbon forearm
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jason8251</div><div class="ubbcode-body">Also does anybody else make round forearms for an AR-10 type rifle. </div></div>
First, before anyone gets too far into the recommendations...are you actually having an AR-10 built or are you having some other (like DPMS pattern 308 rifle) built??? Only the Armalite = AR-10. Everything else is what it is (i.e. - DPMS LR-308, POF P-308, KAC SR-25, etc.).
With that said...I run PRI handguards on a couple different ARs and I am building an AR-10 "Match Carbine" right now with a PRI setup. They are excellent products, but not cheap.
As for alternatives...
Can you clarify whether you mean and Armalite pattern or a DPMS/KAC pattern rifle? It makes a difference because the HGs are NOT compatible between the two platforms.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jason8251</div><div class="ubbcode-body">Also does anybody else make round forearms for an AR-10 type rifle. </div></div>
First, before anyone gets too far into the recommendations...are you actually having an AR-10 built or are you having some other (like DPMS pattern 308 rifle) built??? Only the Armalite = AR-10. Everything else is what it is (i.e. - DPMS LR-308, POF P-308, KAC SR-25, etc.).
With that said...I run PRI handguards on a couple different ARs and I am building an AR-10 "Match Carbine" right now with a PRI setup. They are excellent products, but not cheap.
As for alternatives...
Can you clarify whether you mean and Armalite pattern or a DPMS/KAC pattern rifle? It makes a difference because the HGs are NOT compatible between the two platforms.
Re: PRI carbon forearm
I have a 17" JLZ upper from MSTN with the PRI handguard and I really like it. It is perfectly sized and feels good on my hands, but it does get hot. I don't think there is much in the way of alternatives, but I do know DPMS makes a carbon fiber forearm for its .308 rifles.
I'm not sure if This is for the AR-15 or AR 308, but hopefully it helps get you started in the right direction.
The other option is the JP Vtac here
I have a 17" JLZ upper from MSTN with the PRI handguard and I really like it. It is perfectly sized and feels good on my hands, but it does get hot. I don't think there is much in the way of alternatives, but I do know DPMS makes a carbon fiber forearm for its .308 rifles.
I'm not sure if This is for the AR-15 or AR 308, but hopefully it helps get you started in the right direction.
The other option is the JP Vtac here
Re: PRI carbon forearm
In the round, movable rail handguards-
One affordable option is MI's handguards -
http://www.midwayusa.com/viewProduct/?productNumber=2344114534
I have a set that is waiting for a build and they look of high quality. Great price.
Additionally, Alexander Arms has a very nice pair:
http://www.alexanderarms.com/item/36/176/MK10PlusCompositeHandguards.htm
Price is a bit high, but they look good.
I have no idea if either of these two work on AR-10 platforms however.
In the round, movable rail handguards-
One affordable option is MI's handguards -
http://www.midwayusa.com/viewProduct/?productNumber=2344114534
I have a set that is waiting for a build and they look of high quality. Great price.
Additionally, Alexander Arms has a very nice pair:
http://www.alexanderarms.com/item/36/176/MK10PlusCompositeHandguards.htm
Price is a bit high, but they look good.
I have no idea if either of these two work on AR-10 platforms however.
Re: PRI carbon forearm
PRI handguards are my personal favorite they are lightweight and nice looking and the carbon stays cool. IMO PRI invented the bandwagon for round tactical handguards that everyone is now trying to duplicate.
PRI handguards are my personal favorite they are lightweight and nice looking and the carbon stays cool. IMO PRI invented the bandwagon for round tactical handguards that everyone is now trying to duplicate.
Re: PRI carbon forearm
I have 4 of them
1) Spr mk12 mod 1
2) Gap Dpms LR 6.5 credmore
3) APA .308 being built now
4). 458 SOCOM
I think if you don't have to hang a bunch of shit on your forearm that there the way just for the weight savings.. I will see if I can shoot some photos of mine
I have 4 of them
1) Spr mk12 mod 1
2) Gap Dpms LR 6.5 credmore
3) APA .308 being built now
4). 458 SOCOM
I think if you don't have to hang a bunch of shit on your forearm that there the way just for the weight savings.. I will see if I can shoot some photos of mine
Re: PRI carbon forearm
Your right I should have been more specific. I'm totally new to .308's. I'm sending a Mega MA-TEN reciever set to GAP when it arrives and have them build it. If I read the description correctly the MA-TEN will accept DPMS, Armalite, Knights compatable style hand guards.
If this is not correct please let me know but that is how I read it. I guess I call Mega to be sure.
Your right I should have been more specific. I'm totally new to .308's. I'm sending a Mega MA-TEN reciever set to GAP when it arrives and have them build it. If I read the description correctly the MA-TEN will accept DPMS, Armalite, Knights compatable style hand guards.
If this is not correct please let me know but that is how I read it. I guess I call Mega to be sure.
Re: PRI carbon forearm
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jason8251</div><div class="ubbcode-body">If I read the description correctly it will accept DPMS, Armalite, Knights compatable style hand guards. </div></div>
Nope...the MA-TEN uses KAC/DPMS/SR-25 handguards/barrel nuts ONLY.
http://www.megamachineshop.com/ma-ten-compatibility.php#handguards
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jason8251</div><div class="ubbcode-body">If I read the description correctly it will accept DPMS, Armalite, Knights compatable style hand guards. </div></div>
Nope...the MA-TEN uses KAC/DPMS/SR-25 handguards/barrel nuts ONLY.
http://www.megamachineshop.com/ma-ten-compatibility.php#handguards
Re: PRI carbon forearm
Thanks ORD. When I read "the same rail height as the AR-10" I thought it was compatable with the Armalite as well.
Thanks ORD. When I read "the same rail height as the AR-10" I thought it was compatable with the Armalite as well.
Re: PRI carbon forearm
I'm so spoiled by having one. It's so much noticeably lighter than anything else in a rifle-length setup.
I don't burn through rounds to heat it up to the point of discomfort, but picking up railed ARs at gun shops make me miss the PRI's balance instantly.
I'm so spoiled by having one. It's so much noticeably lighter than anything else in a rifle-length setup.
I don't burn through rounds to heat it up to the point of discomfort, but picking up railed ARs at gun shops make me miss the PRI's balance instantly.
Re: PRI carbon forearm
In terms of "round" handguards, you still have a good many options, including:
1) PRI;
2) DPMS;
3) JP Enterprises/Viking Tactics (VTAC);
4) Fulton Armory Titan.
I am sure there are others, but that gives you a start. I wholeheartedly recommend the PRI offerings. They are excellent if they are within your budget!
In terms of "round" handguards, you still have a good many options, including:
1) PRI;
2) DPMS;
3) JP Enterprises/Viking Tactics (VTAC);
4) Fulton Armory Titan.
I am sure there are others, but that gives you a start. I wholeheartedly recommend the PRI offerings. They are excellent if they are within your budget!
Re: PRI carbon forearm
Thanks alot for all the suggestions and educating me a little bit ORD. Now that I have opened this can of worms can somebody explain to me the difference in between the Armalite and the KAC/DPMS recievers as far as compatability of accessories.
If it's like, everything is different or a ton of shit don't worry about it I'll figure it out eventually. I'm usung the MA-TEN for sure so it's just for my own knowledge at this point.
Thanks alot for all the suggestions and educating me a little bit ORD. Now that I have opened this can of worms can somebody explain to me the difference in between the Armalite and the KAC/DPMS recievers as far as compatability of accessories.
If it's like, everything is different or a ton of shit don't worry about it I'll figure it out eventually. I'm usung the MA-TEN for sure so it's just for my own knowledge at this point.
Re: PRI carbon forearm
I've held lots of different 308 forearms and think the PRI is the best. I had a build going where I was going to use the badger but it's on hold until I can get my hands on a PRI.
I've held lots of different 308 forearms and think the PRI is the best. I had a build going where I was going to use the badger but it's on hold until I can get my hands on a PRI.
Re: PRI carbon forearm
the thread pattern for the armalite barrel nut is different than the one for the DPMS. the rear radius of the upper on an armalite is different than the DPMS. the armalite is straight, the DPMS curved. there are more im sure, but these two come to mind. and the threads prevent compatability of accessories
the thread pattern for the armalite barrel nut is different than the one for the DPMS. the rear radius of the upper on an armalite is different than the DPMS. the armalite is straight, the DPMS curved. there are more im sure, but these two come to mind. and the threads prevent compatability of accessories
Re: PRI carbon forearm
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jason8251</div><div class="ubbcode-body">Thanks alot for all the suggestions and educating me a little bit ORD. Now that I have opened this can of worms can somebody explain to me the difference in between the Armalite and the KAC/DPMS recievers as far as compatability of accessories.
If it's like, everything is different or a ton of shit don't worry about it I'll figure it out eventually. I'm usung the MA-TEN for sure so it's just for my own knowledge at this point. </div></div>
There are some fundamental differences between the platforms, the largest of which are the magazines (you will need DPMS/KAC/Magpul LR20 PMAGS/C-Products mags). The handguards/barrel nuts are different, barrel extensions, bolt catches, take-down pins, gas tubes, etc. Since you are building out on a MA-TEN, just stick to "DPMS/KAC" compatible parts and you should be fine.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jason8251</div><div class="ubbcode-body">Thanks alot for all the suggestions and educating me a little bit ORD. Now that I have opened this can of worms can somebody explain to me the difference in between the Armalite and the KAC/DPMS recievers as far as compatability of accessories.
If it's like, everything is different or a ton of shit don't worry about it I'll figure it out eventually. I'm usung the MA-TEN for sure so it's just for my own knowledge at this point. </div></div>
There are some fundamental differences between the platforms, the largest of which are the magazines (you will need DPMS/KAC/Magpul LR20 PMAGS/C-Products mags). The handguards/barrel nuts are different, barrel extensions, bolt catches, take-down pins, gas tubes, etc. Since you are building out on a MA-TEN, just stick to "DPMS/KAC" compatible parts and you should be fine.
Similar threads
