• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

PSA 3rd gen PA10 buffer question.

Basic user

Private
Supporter
Full Member
Minuteman
  • Oct 11, 2013
    223
    54
    Anyone successfully install a JP SCS in their 3rd gen PA10 yet? I can not get a hold of jp enterprises at all. Thanks!
     
    PAs are “armalite pattern” which uses a standard carbine buffer (length not weight) and a longer buffer tube on their collapsible models. You’ll either need a spacer for the SCS or a standard carbine tube. Either way should run like a champ.

    *caveat* I don’t have one, but a buddy has a...Gen 2 maybe?
     
    Just looked at the pics of the Gen 3s and it looks like the receivers are now DPMS pattern, so it may just drop right in. Easy way to tell is to measure your current buffer. If it’s 3.5” you’ll need a different tube or a spacer.
     
    Just looked at the pics of the Gen 3s and it looks like the receivers are now DPMS pattern, so it may just drop right in. Easy way to tell is to measure your current buffer. If it’s 3.5” you’ll need a different tube or a spacer.
    Roger. Will try that out. Thanks!