QD Scope rings

[EddieE]

I'm looking at getting new 30 mm rings. These will be used on a 223 bolt gun and possibly 6.5 mm CM. Are QD rings as solid as traditional rings with screws? I'd hate to have to deal with scope movement.

 

[PDXGS]

Why not a QD base instead... Like an SPR type mount from Larue ?

 

[EddieE]

Why not a QD base instead... Like an SPR type mount from Larue ?

Already have a base, so want to make things work with what I have.

 

[deersniper]

Better off just getting decent rings and a torque wrench. Unless you need to take it off in the field for irons or night vision or something.

 

[EddieE]

Better off just getting decent rings and a torque wrench. Unless you need to take it off in the field for irons or night vision or something.

Being cheap. Would like to get one nice scope and move it around on different guns.

 

[Silverjay]

I ran a set or ARMS 22M for several years with no issues. Went between rifles and never had a problem. Have to make sure you load the rings the right direction when lock them on the rail. I don't use them anymore because I want to 34mm tubes. If you are interested let me know.

 

[PDXGS]

My point about a QD rail & rings, instead of just QD rings is that it stays in much better alignment.
My Larue mount is transferable between guns without too much trouble to re-zero.
http://www.larue.com/larue-tactical-...scope-mount-qd

 

[Silverjay]

Same issue with Larue mounts, I runs several of those as well as an ADM. They all have a little play when you set them on the rail and need to be set forward before you swing the levers.

 

[RobbinsHGray]

Same issue with Larue mounts, I runs several of those as well as an ADM. They all have a little play when you set them on the rail and need to be set forward before you swing the levers.

For tactical shooting Bobro mounts. I use them on most all of my scopes. I just sighted in a new Mark 6 and took it with my JP 223 to the NSFF fantasy camp. I had the scope on and off a dozen plus time. Easy to use and holds zero every time. Auto adjusts itself to fit super tight in the rail. And Andrew Bobro is a great guy.

 

[deersniper]

Being cheap. Would like to get one nice scope and move it around on different guns.

Just get a Borka set and some decent rings. You will use the Borka kit on a lot of stuff.

 

[remington patriot]

SPUHR QD scope mounts. I can't stand the vertical split ring scope mount design.