I took my rifle and can to the range the other day. The first two rounds were less than a half inch. The third and fourth rounds were 3 inches right and about two inches low. I can let the can cool and it goes right back to original POI. I have checked and the can is not loose. Anyone ever had a similar experience?
Suppressors Question about my Recce 7
- Thread starter Brad79
- Start date
How tight are you tightening it down? I noticed Id have a flyer or two when I just lightly tightened it down. Once I learned I needed to tighten it down pretty good it kept good groups. Which direction is your POI shift and how far with the can on/off?
When I didn't snug it down pretty tight
When I tightened it up pretty tight
Those groups were shot pretty quick so its capable of a little better than that but I was mainly testing to see what difference tightening it down a little harder made. The big squares are 1" with gray 1/4" lines for size reference. I just got mine last week and have only had it out twice so Im still tinkering and learning what it likes after working through some gun/load issues.
When I didn't snug it down pretty tight
When I tightened it up pretty tight
Those groups were shot pretty quick so its capable of a little better than that but I was mainly testing to see what difference tightening it down a little harder made. The big squares are 1" with gray 1/4" lines for size reference. I just got mine last week and have only had it out twice so Im still tinkering and learning what it likes after working through some gun/load issues.
Similar threads
