Question AICS recoil lug inlet

[81sfo]

What is the recoil lug inlet thickness on the AICS sa 2.0?thanks.

 

[deadly0311]

Re: Question AICS recoil lug inlet

if it is a newer production one, should be .250

 

[ORD]

Re: Question AICS recoil lug inlet

If it is an older one, it should be 0.190" if memory serves.

 

[Bob Roach]

Re: Question AICS recoil lug inlet

I have 3 older stocks. They were all the correct size for a factory Remington Lug. As all 3 of mine have oversize lugs, I had to have all three machined out by my gunsmith for the thicker after market lugs.

 

[81sfo]

Re: Question AICS recoil lug inlet

Thanks fellas, hopefully ill get one of the newer production stocks so my barreld action w Tac ops oversize lug fits right in?

 

[montyb]

Re: Question AICS recoil lug inlet

i have had to fit an oversize lug into an older AICS. i chucked the barreled action in a lathe and faced the front (muzzle side) of the recoil lug until it fit. .186" IIRC. this left the stock untouched, and the operation only took 30 minutes or so.