RCBS Case Prep Center tricks/add-ons

[Creature]

I snagged one of these a little while back and have been trying to maximize it's usefulness. I've found that the Lyman deburr tool works light years better than the RCBS one. It has a rod that goes up through the center and three teeth. Sometimes after trimming a case I get a little lip on the on the mouth of the case. The RCBS takes about one whole minute to grind it off while the Lyman can have it done in seconds.

I've also added a VLD cham bit instead of the stock one. Now I use two of each bit so I can do two cases at a time.

The only thing I'm still having a problem with is the primer pocket brush/cleaner. It takes forever. Anyone figured out a more effect bit for primer pocket cleaning?

 

[ChrisGarrett]

I have the RCBS TrimMate and i can use an old bore brush for slightly cleaning the case necks, I can use the Hornady decrimping bits, I can use the RCBS primer pocket cleaners, I can use the Lyman flash hole deburer tool and I've fashioned a cigar tube to spin the cases when I want to anneal them.

Chris

 

[milo 2.0]

The only thing I'm still having a problem with is the primer pocket brush/cleaner. It takes forever. Anyone figured out a more effect bit for primer pocket cleaning?

Buy the small and large primer pocket uniformer, it uniforms on the first time, cleans out soot on subsequent firings.

 

[Some Day]

Just got one for christmas and just learned a lot thanks guys.Love the hide