So I took the Reactor Fusion module out for the first time. Now, I'll start by saying, I'm not using the hud as an angle indicator. My intent is to use the data, post range trip, to identify and correct bad habits. It worked very well for it's intended purpose.
When powering the device on, you must connect via bluetooth, select a rifle and a an ammo profile. Then, you will calibrate the module by moving it around on all axis. This can be a bit annoying, the device will time out after a period with no motion. So if you plan to use this through a competition you will be calibrating before each stage.
The data recorded was accurate and useful, it showed I have a tendency to lean into my strong side a bit. I picked up all my shots accurately and functioned appropriately.
As far as it's construction, the module is compact. The button is firm, yet tactile and as far as mother nature is concerned, water resistant (may have got rained out). The module was mounted on the left side of my Grayboe ridgeback stock. The arca rails and mount did not fit well, the mount was a bit proud and needed taken down a bit to fit snug. Some 80grit sand paper and block aided in a perfect fit.
Reactor USA as a company has been very helpful and accommodating. When I purchase items from a company for the first time, I request they draw me a picture in the notes. Reactor went one step further and made the header of my app, my teams logo. While I was awaiting my hardware, they informed me production cost was less than expected and refunded me a portion of the cost. All of these communications were not just a "do not reply" email blast, but personal communications from their staff.
All in all I'm very satisfied with the Fusion Module and look forward to continued use.
When powering the device on, you must connect via bluetooth, select a rifle and a an ammo profile. Then, you will calibrate the module by moving it around on all axis. This can be a bit annoying, the device will time out after a period with no motion. So if you plan to use this through a competition you will be calibrating before each stage.
The data recorded was accurate and useful, it showed I have a tendency to lean into my strong side a bit. I picked up all my shots accurately and functioned appropriately.
As far as it's construction, the module is compact. The button is firm, yet tactile and as far as mother nature is concerned, water resistant (may have got rained out). The module was mounted on the left side of my Grayboe ridgeback stock. The arca rails and mount did not fit well, the mount was a bit proud and needed taken down a bit to fit snug. Some 80grit sand paper and block aided in a perfect fit.
Reactor USA as a company has been very helpful and accommodating. When I purchase items from a company for the first time, I request they draw me a picture in the notes. Reactor went one step further and made the header of my app, my teams logo. While I was awaiting my hardware, they informed me production cost was less than expected and refunded me a portion of the cost. All of these communications were not just a "do not reply" email blast, but personal communications from their staff.
All in all I'm very satisfied with the Fusion Module and look forward to continued use.
