Gunsmithing Rechambering a 22-250 AI back to a standard 22-250

[Kubitza123]

Looking at a stiller tac 30 barreled action thats exactly what i'm looking for with a Hart MAX HV barrel. Its 1.250 and still have roughly 2.5-3" in front of the recoil lug before the slight taper begins. I dont like the thought of fire forming and burning a barrel up to get your brass so was wondering how easy and what it might cost for a gunsmith to rechamber it back to standard 22-250 and if theres plenty of barrel before the taper starts to do so.

Any input would be great, or should i keep it an AI if most shoot very accurate while forming brass?

 

[RADcustom]

Re: Rechambering a 22-250 AI back to a standard 22-250

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Kubitza</div><div class="ubbcode-body"> should i keep it an AI if most shoot very accurate while forming brass? </div></div>

I would do this.

 

[johninok]

Re: Rechambering a 22-250 AI back to a standard 22-250

I agree, shoot it first, my AI shot as good forming as it did with formed full house AI loads.

 

[Kubitza123]

Re: Rechambering a 22-250 AI back to a standard 22-250

Well that's good news to here thanks for the input fellas