Recoil pad on Mcmillan A5

[JBomb]

I would like to know if anyone has replaced their recoil pad to lesson recoil? I am shooting a 300WSM, without the brake I can shoot/ tolerate 50 rounds but as the day progresses it just beats you up. I would like to shoot this rifle at a class but, I'm a little apprehensive about sitting behind the rifle for 400 rounds over three days.

Has anyone replaced their recoil pad on their A5? I see on McMillans website they have a Decelerator and a Limbsaver listed as options. However, in the FAQ the Limbsaver cannot be used on the A5 since the bolt spacing would interfere with the internal air chamber?

Kind regards,
Jared

 

[Hawk45]

Re: Recoil pad on Mcmillan A5

I have about a 1/2" longer length of pull so I just put on a Limb Saver slip-on pad over the existing. If you have a standard LOP, you can get a grind-to-fit to replace the existing. Sometimes you have to drill new holes but it's not that hard if you a the least bit handy.

 

[JB02]

Re: Recoil pad on Mcmillan A5

The slip on limbsaver pad, ~ 1/2", works great.

 

[Dick D]

Re: Recoil pad on Mcmillan A5

Jarad,
You can always put a limbsaver pad on an A-5, you just cannot use one with the spacer system or our 2-way or 3-way buttplate systems. These are all machined for the Pachmyer hole spacing and the Limbsaver pads have a different hole spacing.

 

[JBomb]

Re: Recoil pad on Mcmillan A5

Thanks for the update Mr.Davis. I do have the spacer system, so maybe I can find something in the Pachmyer line.

Kind regards,
Jared

 

[seanh]

Re: Recoil pad on Mcmillan A5

Why not get a break put on?

You can get PAST pad
http://www.chuckhawks.com/past_recoil_pads.htm

or
http://www.nokick.com/Shoulder_EEZ_Recoil_Pad_Insert_shirt_vest_coat_p/702-140.htm


Silicone gel anti-vibration pad

http://www.vibrationmounts.com/RFQ/VM08004.htm
http://www.hellotrade.com/advanced-antiv...-isolators.html
(((Hint- this stuff is in keyboard wrist pads- mouse pad base etc)))

 

[KTDLS7]

Re: Recoil pad on Mcmillan A5

Best solution? Install a brake or suppressor.

The slip-on Limbsaver is a quick fix and works fair, but get one that fits tight so it won't slip around. The problem using a slip-on on an A5 is the stock toe is flat, not pointed.

Kevin

 

[JBomb]

Re: Recoil pad on Mcmillan A5

The gun does have a brake installed. However, I cannot use it during certain matches because of disruption of other shooters.

I'll look into a slip on pad. Thanks for the replies.

Kind regards,
Jared

 

[ezee]

Re: Recoil pad on Mcmillan A5

I have an A3 and two A3-5 stocks. All have 3 way adj buttplates. They came with 1/2" rubber buttpads. I ordered a 1" cushioned pad from Mcmillin for 2 of them. They fit perfectly and helped with felt recoil.

 

[Xshot]

Re: Recoil pad on Mcmillan A5

The grind to fit LimbSaver is a bit tedious to fit, but their product works fantastic. BIG difference in the felt recoil.