Recommendation for action screws, REM 700

[Space Jam Darimon]

I just picked up a Magpul Hunter 700 SA stock for my Rem 700. I also have the detachable box magazine bottom metal from Magpul as well. The front action screw is to short and won’t catch at all and the rear goes in about a third of the way.

I don’t much care if they are stainless or colored. Just that if I have to cut them down that I can refinish them as it’s a hunting rifle and is out in the elements.

If you have a recommendation for some different ones it’d be much appreciated.

 

[Threadcutter308]

I just picked up a Magpul Hunter 700 SA stock for my Rem 700. I also have the detachable box magazine bottom metal from Magpul as well. The front action screw is to short and won’t catch at all and the rear goes in about a third of the way.

I don’t much care if they are stainless or colored. Just that if I have to cut them down that I can refinish them as it’s a hunting rifle and is out in the elements.

If you have a recommendation for some different ones it’d be much appreciated.

 

[KnowNothing256]

I like a Torx drive over hex, Badger Ordnance will sell you a couple of their 1/4-28 T30 drive rear screws if you call them. I just cut them down to the size I need.

 

[Trigger Monkey]

https://www.batmachine.com/product/action-screws/

These will probably be more compatible with the taper for the action screws on the Magpul DBM.

 

[KnowNothing256]

Ah, didn't pay attention to the DBM

 

[Space Jam Darimon]

Thank you, I will look in to these options!