Recommendations for an 11mm to Picatinny adapter

[pklin1297]

Hello everyone,

Have an Airforce Talon air rifle with the standard air gun 11mm dovetail right and currently using a dovetail mount for my Bushnell. I'm looking for recommendations for a dovetail to Picatinny adapter so I use regular scope rings. Thanks in advance!

 

[sobrbiker883]

Re: Recommendations for an 11mm to Picatinny adapter

see if rimfire technologies has anything that will fit....

 

[sobrbiker883]

Re: Recommendations for an 11mm to Picatinny adapter

It has an port cutout you probably don't need, but if the talon is an 11mm dovetail it should work:
http://www.rimfiretechnologies.com/ProductDetails.asp?ProductCode=16002

 

[pklin1297]

Re: Recommendations for an 11mm to Picatinny adapter

Thanks sobr, they turn out some nice stuff... That cutout is definitely not needed but I will keep that unit in mind.

More recommendations welcome!

 

[95LTZ]

Re: Recommendations for an 11mm to Picatinny adapter

B-Square makes an aluminum adapter 3/8ths dovetail to weaver style. 3/8ths is about .058 smaller than 11mm. I have taken a large blade standard screwdriver and twist it a little to spread it. I then just tap it on the dovetail with the handle of the screwdriver.
Semper Fi

 

[sobrbiker883]

Re: Recommendations for an 11mm to Picatinny adapter

Aren't AI's 11mm?

 

[pklin1297]

Re: Recommendations for an 11mm to Picatinny adapter

I need to measure the rail again. I thought I had read somewhere that my Condor (not a Talon, this is a long barrel) has an 11mm rail but now I'm thinking it is a standard airgun 3/8". I will have to search some more.

 

[sobrbiker883]

Re: Recommendations for an 11mm to Picatinny adapter

BKL rings and be done with it!