Sidearms & Scatterguns Red dot on Glock without slide cut?

[Jayjay1]

Hey guys,
milling a slide is just a pita over here, so I´m looking for a good alternative.

Are there bulletproofed solutions to mount a red dot on a Glock without a slide cut?

I want to add a Steiner MPS on a Glock 31.

I´ve found this on youtube, beginning at 2:55 min.:


But no Steiner MPS (Aimpoint Acro footprint) there.

 

[SanPatHogger]

I used something similar. It came loose repeatedly.

 

[waveslayer]

Yes. Get the UM Tactical mount, I use it all the time. It works well! Plus, you only need one holster for any weapon with their mount. Have issues, PM me

 

[Jayjay1]

Hey waveslayer,
thank you, but I want it mounted on the slide.
It is not for sport shooting, sorry.

 

[waveslayer]

Going full hunter or ccw?

 

[Jayjay1]

Hunting in brush country.

 

[dirtybores]

I use that mount on a g43 in my overnight bag. It doesn't come "loose" like you could jiggle it, but it certainly flexes and the zero walks around. For defensive close range point-n-shoot I trust it about like just looking down the slide. Its not ideal.

 

[Bluedog82]

I don’t think you’ll find a bulletproof method that doesn’t involve cutting the slide. JAGERWERKS does a great job and during one of their sales you should be out the door for $150 or less.

 

[M4guru]

Raven made the only one I ever saw that stayed put. They're out of production and have been for almost a decade but you might be able to find one somewhere.

https://www.omahaoutdoors.com/raven-balor-rmr-mount/

 

[sgtsmmiii]

This one is nice Bobro Glock Mount .

 

[Hoyter87]

FITS GLOCK MOS (19 / 17 / 26 / 34 / etc.) - C&H Precision

Browse Glock MOS Products from CHPWS | Glock MOS Adapter Plates for sale

chpws.com

 

[M4guru]

FITS GLOCK MOS (19 / 17 / 26 / 34 / etc.) - C&H Precision

Browse Glock MOS Products from CHPWS | Glock MOS Adapter Plates for sale

chpws.com

Quite literally the opposite of what OP asked for.

 

[Hoyter87]

Quite literally the opposite of what OP asked for.

Didn't realize he meant for his dovetail. Thanks for pointing it out.

 

[91Eunozs]

You can just do it yourself…mine turned out great!

 

[Jadazu]

OP,

Are you able to purchase a replacement slide? The best deal for me was to buy a non-Glock slide made with the optic cut.

I did use the dovetail mount plate first, to tryout the RDS I thought I wanted. The dovetail slot mount is not 100% solid, as mentioned above. If you do use one, you can bed it with thickened epoxy between the sight base plate and the slide, to fill the gaps. Color the epoxy black...

 

[Jayjay1]

Jadazu, I will check that.
Might be a bit tricky because of the restrictions but I´ll make a try.