Rem 700 .308 Win 16.5” 5/8x24 Barrel SOLD

[Brandon05_88]

Remington 700 .308 Win 16.5” 1:10” twist and threaded 5/8x24 barrel. Bought used with unknown round count. Had a local barrel manufacturer install it on my action and touch up the crown. I put 176 rounds through it. A 3 shot group with 175 RDF, Varget, Lapua, and CCI BR2 measured 0.245” at 100 yards during load development. A 3 shot subsonic group with 175 RDF, Trailboss, Lapua, and CCI BR2 measured 0.860” and 4 out of a 5 shot group measured 1.746” both at 200 yards during load development. You can see the finish has a shiny area where it has been pulled and installed. Also, the muzzle has an area where the finish has been rubbed down, and I received the barrel like that. I took pictures to show these areas. Excel spreadsheet of notes and load development can be emailed to buyer. I need a dedicated deer rifle, so I’m putting a thinner profile barrel on the action. PM with any questions or for more pictures.

SOLD, or best offer, shipped UPS Ground. PayPal preferred. I typically ship the next business day after payment is received.

 

[Brandon05_88]

Bump

 

[Brandon05_88]

Bump

 

[Brandon05_88]

Bump

 

[Brandon05_88]

Bump

 

[kjh762]

Is it still factory shoulder & threads?

 

[Brandon05_88]

Is it still factory shoulder & threads?

Yes, bought it as a take off barrel, installed on my action with factory recoil lug, checked headspace, and touched up crown.
I had the barrel removed from my action, and a thinner profile installed on the action.
It still has all factory threads on both ends, and my action has not been trued.