Short video shooting my .300 WinMag at 800 yards. This rifle has been through many changes over the years - as it was my first rifle I built up over ten years ago.
In 1999 it was originally an Arnold Arms "Neutralizer" with an A2 stock and Remington DBM - not happy with the Rem DBM In 2000 I had IBA (Chandler) install an A5 and Badger triggerguard in place; esentially a single shot rifle now since Arnold Arms machined the receiver for the Rem DBM. In 2006 I had GAP install a Badger DBM triggerguard to get the repeater aspect back.
Many of thousands of $ in gunsmithing, but a lesson over the years in getting it right up front.
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/-02ptuSMD3I"></param> <param name="wmode" value="transparent"></param> <embed src="http://www.youtube.com/v/-02ptuSMD3I" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object>
In 1999 it was originally an Arnold Arms "Neutralizer" with an A2 stock and Remington DBM - not happy with the Rem DBM In 2000 I had IBA (Chandler) install an A5 and Badger triggerguard in place; esentially a single shot rifle now since Arnold Arms machined the receiver for the Rem DBM. In 2006 I had GAP install a Badger DBM triggerguard to get the repeater aspect back.
Many of thousands of $ in gunsmithing, but a lesson over the years in getting it right up front.
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/-02ptuSMD3I"></param> <param name="wmode" value="transparent"></param> <embed src="http://www.youtube.com/v/-02ptuSMD3I" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object>