Can I use this kit http://www.midwayusa.com/viewProduct/default.aspx?productNumber=502904 for my savage 110 that I just got a manners stock for
Gunsmithing Remington 700 Bedding kit for a Savage
- Thread starter TKellogg
- Start date
Re: Remington 700 Bedding kit for a Savage
Yes. You can. However you'll have to trim the pillars to match the varying heights of the two actions/stocks. Remember to leave the rearmost hole in the action Floating. Read the bedding section at the start of the threads. You'll have to open the Manners holes to be oversize of the pillars. Lots of little details in there that is impossible to explain in short-hand. The middle pillar (actally the rear pillar...since the rear of the action floats) will have to be notched out to clear the trigger. Can be done...but, you probably shouldn't start out on this project without some hands on help from a person who has done it before...and correctly. JMHO
Yes. You can. However you'll have to trim the pillars to match the varying heights of the two actions/stocks. Remember to leave the rearmost hole in the action Floating. Read the bedding section at the start of the threads. You'll have to open the Manners holes to be oversize of the pillars. Lots of little details in there that is impossible to explain in short-hand. The middle pillar (actally the rear pillar...since the rear of the action floats) will have to be notched out to clear the trigger. Can be done...but, you probably shouldn't start out on this project without some hands on help from a person who has done it before...and correctly. JMHO
Re: Remington 700 Bedding kit for a Savage
Here's a kit that has the proper pillars. They will be the correct length and notched for the sear.
http://cgi.ebay.com/Gunsmith-Accuracy-Pi...=item3a66f9644e
Here's a kit that has the proper pillars. They will be the correct length and notched for the sear.
http://cgi.ebay.com/Gunsmith-Accuracy-Pi...=item3a66f9644e
Re: Remington 700 Bedding kit for a Savage
Thanks for the help guys...Thinking this will be my winter project
Thanks for the help guys...Thinking this will be my winter project
Similar threads
