Gunsmithing Remington 870 gunsmith advice wanted

[kaufenpreis]

Iv got a 1187 compact 20 gauge for my 7 yr old and its still to long it has a synthic stock can I buy a wooden stock for a 870 20 gauge to cutt short to fit?? Will stock inner change on a 1187 to a 870?? Can't seem to find a wood stock for 1187 but I can find them for the 870! Please help before I waste money. Thank u

 

[chipsfan]

IIRC they are different because of the drive spring tube at the rear of the receiver. I built one 11-87 years ago and lots of 870s. I vaguely recall trying to interchange stocks and it not being possible.

 

[Turd in the Pool]

You can make it work but it will require a spacer. I just measured one of each and it looks like the recess for the stock bolt washer on the 870 is 2" deeper than the 11-87.

Another thing to consider. If your "compact" is a youth/Ladies model. You can only shorten it about 1/2" without jumping thru hoops.

I can't remember how much is possible but I've cut the action spring tube nut down and relieved the pad to allow it to go inside. Big pain for about an extra 1/2". Might want to look under your pad before you spend your $.

 

[GH41]

Iv got a 1187 compact 20 gauge for my 7 yr old and its still to long it has a synthic stock can I buy a wooden stock for a 870 20 gauge to cutt short to fit?? Will stock inner change on a 1187 to a 870?? Can't seem to find a wood stock for 1187 but I can find them for the 870! Please help before I waste money. Thank u

You didn't look very hard! PRE-FINISHED REPLACEMENT SHOTGUN STOCKS | Brownells GH

 

[Mortarman0341]

Boyds: AP REMINGTON® 1187 20 GA STK FC F AP American Plainsman