Gunsmithing Remington Timney Installation?
- Thread starter dbsinh2o
- Start date
Re: Remington Timney Installation?
Get a leather/rubber mallet and whack on the cocking indicator after your done.
Properly fitted the striker shouldn't fall. An alarming # fail the test.
Be careful.
C.
Get a leather/rubber mallet and whack on the cocking indicator after your done.
Properly fitted the striker shouldn't fall. An alarming # fail the test.
Be careful.
C.
Re: Remington Timney Installation?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: LoneWolfUSMC</div><div class="ubbcode-body">Simple to install.
Why so light? </div></div>
I'll only be using this rifle for target shooting, and I prefer a light trigger for this purpose.
I wouldn't think of going hunting with a 1.5 pounder.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: LoneWolfUSMC</div><div class="ubbcode-body">Simple to install.
Why so light? </div></div>
I'll only be using this rifle for target shooting, and I prefer a light trigger for this purpose.
I wouldn't think of going hunting with a 1.5 pounder.
Re: Remington Timney Installation?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: C. Dixon</div><div class="ubbcode-body">Get a leather/rubber mallet and whack on the cocking indicator after your done.
Properly fitted the striker shouldn't fall. An alarming # fail the test.
Be careful.
C. </div></div>
Do you mean Timney triggers sometimes fail this test or other 700 triggers?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: C. Dixon</div><div class="ubbcode-body">Get a leather/rubber mallet and whack on the cocking indicator after your done.
Properly fitted the striker shouldn't fall. An alarming # fail the test.
Be careful.
C. </div></div>
Do you mean Timney triggers sometimes fail this test or other 700 triggers?
Re: Remington Timney Installation?
Good question. I'm planning on installing a Timney on my Remington 700 and would love to hear what Chad thinks about it.....I thought it was just the X Mark triggers that have this problem.
Good question. I'm planning on installing a Timney on my Remington 700 and would love to hear what Chad thinks about it.....I thought it was just the X Mark triggers that have this problem.
Re: Remington Timney Installation?
There are quite a few safety checks that should be done with any trigger install, no matter what brand.
Especially with a 1.5 pound trigger.
I don't think Mr. Dixon was referring only to Timneys, but to all Remington trigger installations. Could be wrong on that though. Timneys are different.
There are quite a few safety checks that should be done with any trigger install, no matter what brand.
Especially with a 1.5 pound trigger.
I don't think Mr. Dixon was referring only to Timneys, but to all Remington trigger installations. Could be wrong on that though. Timneys are different.
Similar threads
