Removing primer crimp 223 brass question

[AK264]

I have never removed 223 primer crimps. Seeking advise on technique and tool, single stage reloading.

 

[Facemelter]

Re: Removing primer crimp 223 brass question

How many cases are you planning on doing?

 

[Beef82]

Re: Removing primer crimp 223 brass question

Search, this has been addressed many times, including a few this week

 

[killerwaffles]

Re: Removing primer crimp 223 brass question

http://www.dillonprecision.com/content/p/9/pid/25263/catid/8/Super_Swage_600

 

[EXTREMEPREJUDICE]

Re: Removing primer crimp 223 brass question

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Killerwaffles</div><div class="ubbcode-body">http://www.dillonprecision.com/content/p/9/pid/25263/catid/8/Super_Swage_600 </div></div> Works for me.......

 

[jet_lagged]

Re: Removing primer crimp 223 brass question

The Dillon super swage 600 is great if you are really doing a huge number of cases. But it is pricy.

For a smaller amount/volume, I would take a looks at the RCBS system:

http://www.midwayusa.com/product/235832/rcbs-primer-pocket-swager-combo-2

You will need to sort the cases by headstamp to get the best results using either one.

 

[wrhunter]

Re: Removing primer crimp 223 brass question

I use the Hornady reamer in an RCBS case prep station. Or you can just chuck it in a drill and go to work.

 

[AK264]

Re: Removing primer crimp 223 brass question

Thanks guys, ive got 4 or 5 k of these but i was just going to do a k to start and wear those out then do the next k ...
I probably should look at the dillon.

 

[The Mechanic]

Re: Removing primer crimp 223 brass question

http://www.snipershide.com/forum/ubbthre...274#Post3309274

 

[Paladin2147]

Re: Removing primer crimp 223 brass question

Dillon is your friend.

 

[killerwaffles]

Re: Removing primer crimp 223 brass question

Dillon is awesome and you cant go wrong. There is a used one on eBay and the bid right now is about half the cost.

http://www.ebay.com/itm/DILLION-SUPER-SW...=item460395887a

 

[zuke]

Re: Removing primer crimp 223 brass question

http://www.ebay.com/itm/NEW-HSS-1-2-COUN...=item3a71ca6a47

 

[deerassassin22]

Re: Removing primer crimp 223 brass question

I use my RCBS case prep tool super easy and can even attach it to a drill makes less work and super easy to do.

 

[Triggerhappy]

Re: Removing primer crimp 223 brass question

I found this after lots of searching on the same subject.
http://www.xdsupply.com/index.php/weldon...rring-tool.html
I got one on Ebay and it works GREAT I just chuck it in the drill press and take about 1 sec. apiece for the 556 cases. I also use it on my 50BMG cases. It also works for deburring the case mouth (inside). That being said I did get a SS600 on here from another member and it also works great.

 

[Bluesop7]

Re: Removing primer crimp 223 brass question

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Killerwaffles</div><div class="ubbcode-body">http://www.dillonprecision.com/content/p/9/pid/25263/catid/8/Super_Swage_600 </div></div>

This is what I have, once you get into a rythm things go very quickly. Worth every penny in my book.