removing primer crimp,

[rojo]

howdy , I have alot of once fired GI 30-06 brass , is there a tool I can fit in my drill press to remove the primer crimp ??
I bought one of the hand jobs from Lyman , require something alot fast , any ideas

 

[zuke]

Re: removing primer crimp,

go to the store and buy yourself a countersink.

http://en.wikipedia.org/wiki/Countersink

I have the 4 flute version on the left side

 

[JimHanks]

Re: removing primer crimp,

I use this on 223 & 308 brass w/ crimps
http://www.dillonprecision.com/#/content/p/9/pid/25263/catid/8/Super_Swage_600

 

[1lnbrdg]

Re: removing primer crimp,

I use the following:

Deburring tool holder

 

[Former0302]

Re: removing primer crimp,

If you have a lot of it to prep, invest in a Dillon Swager. Easy, and fast.

 

[gunsnjeeps]

Re: removing primer crimp,

I'll agree on the Dillon.

 

[no1special]

Re: removing primer crimp,

check out rcbs. looks like they are making a clone of the dillon.

 

[montgomery627]

Re: removing primer crimp,

Dillion is definitely the way to go.

 

[pmclaine]

Re: removing primer crimp,

Dillon Super 1050 will have you saying "What crimp?"

 

[wrhunter]

Re: removing primer crimp,

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: montgomery627</div><div class="ubbcode-body">Dillion is definitely the way to go. </div></div>
In the meantime... If the Lyman tool is threaded and you have a spare 3 piece cleaning rod lying around, cut a section short and thread the tool onto it and chuck it in a drill.