- Thread starter keith jones
- Start date
One of 2 Vudoos at the match getting some offhand and sitting in. The target was a full size steel IPSC at 220 yards. If you look real close at the top picture, just forward of the puff of smoke, you can make out the grey line that I am 99% positive is the bullet. Not bad for an old man driving an old iPhone.
I have a 40X from CMP, PT&G bolt, and AICS stock + suppressor. Wolf match ammo has been a good round for this setup. I've since changed the Harris bipod out for an Atlas.
Remington 40x magazine conversion. Benchmark 22" mtu contour, mcmillan a3-5, badger m5 bottom metal/efr rail/rings, s&b 4-16, cg 2 stage trigger, cerakote od green. Rifle was built by modacam custom rifles.
Last edited:
Dedicated 22lr mk12 mod1. Compass lake upper and lower, compass lake m261 conversion, douglas barrel by compass lake, ops inc muzzle brake and collar, knights rail/gas block(yes it has a gas block and gas tube obviously just for looks)/bipod mount/sling mount/ambi safety/flip up front and rear buis/grip and panels, pri charging handle, arms rings, nightforce 2.5-10x24, lmt sopmod stock, geissele highspeed match trigger.
Last edited:
Had this rifle for awhile now but other projects and deployments have kept it sidelined in the safe. Finally got around to putting scope on and will shoot some groups this weekend, looking forward to it!
Ruger 77/22 reworked by Tim Cronin at Elk Horn Precision.
22” Mullerworks
McMillan Rimfire Magnum Varmint
Riflebasix Trigger
Ruger 77/22 reworked by Tim Cronin at Elk Horn Precision.
22” Mullerworks
McMillan Rimfire Magnum Varmint
Riflebasix Trigger
Cz455 with 17hmr barrel...have a 22lr as well
Vortex pst2 scope
Krg stock
Dip scope rail
YoDave trigger kit
Silencer co sparrow
Can't remember the bolt knob....but I got it from a recommended site.
She shoots great and is a blast to knock down critters with
Vortex pst2 scope
Krg stock
Dip scope rail
YoDave trigger kit
Silencer co sparrow
Can't remember the bolt knob....but I got it from a recommended site.
She shoots great and is a blast to knock down critters with
Attachments
Last edited:
Just put together this gem.
CZ 455 Varmint
Mcrees G10
Ergo Deluxe
Timney Trigger
Vortex PST Gen 2
Area 419 Scope Rail
Seekins Rings
Federal Ultra Match
CZ 455 Varmint
Mcrees G10
Ergo Deluxe
Timney Trigger
Vortex PST Gen 2
Area 419 Scope Rail
Seekins Rings
Federal Ultra Match
Last edited:
How do you like the Area 419 rail? I was thinking of picking one up for my 455. The DIP has served me well just like the way this one clamps to the dovetail better..
Ben
One more quick question, what are the height of those Nightforce rings? The 419 rail is a good bit higher than the DIP I've been using, gonna try to get lower rings as well.
Ben
This is a little different than most posted here...not a precision rig, just a little plinker.
This is one I wanted to mod to the gills, but keep it somewhat factory appearing...my version of the ultimate classic carbine.
Specs on the build:
-factory receiver, stripped and polished
-factory 18" stainless barrel, polished
-factory metal trigger housing, reshaped a bit and polished
-walnut carbine stock, stripped sanded and refinished
-factory metal barrel band and buttplate, polished
-factory bolt, polished with a VQ extractor
-Rimfire technologies polished target trigger
-Volquartsen match hammer and sear
-rimfire technologies polished mag release
-nodak sights, polished
-auto bolt release, polished
-superior concepts charging handle, polished
-all of the hardware that's visible is also polished
I may replace the stock with one of the crazy striped birch or maple ones I have on the shelf, but I sort of like the classic look of the walnut. After that's decided, I'll install the polished stainless sling studs, and then polish a set of Harris bipods to finish it off.
This is one I wanted to mod to the gills, but keep it somewhat factory appearing...my version of the ultimate classic carbine.
Specs on the build:
-factory receiver, stripped and polished
-factory 18" stainless barrel, polished
-factory metal trigger housing, reshaped a bit and polished
-walnut carbine stock, stripped sanded and refinished
-factory metal barrel band and buttplate, polished
-factory bolt, polished with a VQ extractor
-Rimfire technologies polished target trigger
-Volquartsen match hammer and sear
-rimfire technologies polished mag release
-nodak sights, polished
-auto bolt release, polished
-superior concepts charging handle, polished
-all of the hardware that's visible is also polished
I may replace the stock with one of the crazy striped birch or maple ones I have on the shelf, but I sort of like the classic look of the walnut. After that's decided, I'll install the polished stainless sling studs, and then polish a set of Harris bipods to finish it off.
Not new by any means, but new to me. It's an Underground Skunkworks Model 323 that I just purchased here a week or so ago. I'm just waiting on my Thunder Beast .22 takedown can to see how it shoots. This thing has one of the cleanest bedding jobs I have ever seen. 
Can't believe I missed this, I've drooled over this rifle for years. If you're ever interested in selling I'd be VERY interested! Great snag, beautiful rifle!
Ben
Here you go,
10/22 target 20" in a Mcree's precision chassis
10/22 target 20" in a Mcree's precision chassis
Last edited:
umbrella corporation grip no.23 , my go to grip for almost everything. https://www.ucwrg.com/materiel/grips/6/grip-23/
I've worked up a filler for the gap between the grip to the trigger guard. will update when complete.
I've worked up a filler for the gap between the grip to the trigger guard. will update when complete.
Last edited:
Thanks. I've been looking for more vertical angled grip options.
Sweet. I just ordered two!
My 541T HB I mounted in an A5 Bell & Carlson stock.
Sweet looking stock!
Gaaaaahhhh what happened to this shop? I was tight pants central over their spectre BABR....
Anyways, here’s my 455...
Attachments
My AI AWR (Anschütz International Arctic Warfare Rimfire ) - just finished....
Basis is Anschütz 64 MPR
Best Regards from Germany
Basis is Anschütz 64 MPR
Well done, very nice rifle.
I recently finished my dedicated 22lr upper receiver to mimic my .223 they both shoot tacks and i couldn't be happier with how it turned out
Aero precision upper
Midwest industried keymod handguard
JP enterprises bolt and 18" match barrel
Rise Armament 3.5 flat blade trigger
vortex crossfire II with burris PEPR mount
Bettermag 15-22 magazine adapter
rpr stock
Aero precision upper
Midwest industried keymod handguard
JP enterprises bolt and 18" match barrel
Rise Armament 3.5 flat blade trigger
vortex crossfire II with burris PEPR mount
Bettermag 15-22 magazine adapter
rpr stock
Nice combination. Can you tell me how much work it took to get the Anchutz action to work in the AI stock?
My fun rifle, CZ 455 with boyds stock, bedded, pillared, oversize knob, EGW 0 Moa base, SWFA 3-15 FFP. Works great for the local 35-200yd monthly steel match.
Old paint scheme over a OD green cerakote base. Didn't like so wiped it off with acetone and elbow grease, want to do a true to era vietnam horizontal tiger stripe pattern next.
Old paint scheme over a OD green cerakote base. Didn't like so wiped it off with acetone and elbow grease, want to do a true to era vietnam horizontal tiger stripe pattern next.
Not a prs style for sure, but it is accurate. ARA benchrest rifle for this summer, a 1960's british BSA Martini International MKII falling block single shot. Barrel on this thing is 1.200" at receiver and is 28" long tapering to .870". Rifle weighs 14lb 3oz in this config.
CZ455 in KRG X-Ray 180 chassis
Titan stock,federsen barrel,kidd trigger and bolt---so fun
KIDD receiver, KIDD two-stage trigger, KIDD spiral fluted barrel. PA 4-14x40 and knock-off harris. So far with about 150 rounds of assorted SV down it I am starting to see some progress in the groups. Same rifle had a GM barrel in it before and was an MOA rifle @ 50 but when KIDD released the spiral barrel I really wanted one. GM barrel just means there will have to be another rifle built at some point.
Lot's of really nice rifles in this thread, hope mine fits in and hopefully post up some targets soon.
Similar threads
