Rifle Scopes Ring height, Savage 10 PC

[JohnLaw]

I am mounting a Bushnell G2DMR (50mm) on a Savage 10PC with A Badger 20MOA base and Badger Rings. What Height rings will I need?

 

[opelboy]

Not sure I know how to answer your question because I'm a noob to larger caliber/long range. I can however tell you what i have: a savage 10pc with a weaver 20moa base .5" rings and leupold 8.5-25x50. This set up gives me .505" clearance on my barrel. I have not shot this past 100 yds and the rings are just something I already had so there wasn't any thought put into height needed to achieve a shot at long distances. Sorry I'm not more helpful

 

[JohnLaw]

Its start, thanks. I'm thinking the good folks at Badger will have the answer but I am impatient over the holiday.

 

[2brothers641]

Lows for sure. The Badger base is one of the taller bases. Seekins .82 low rings would be my recommendation.

 

[oldfatguy]

^^^^^^^ This, or Badger "standard" height .823". Room for BC cap on the objective.

OFG

 

[z71rat]

Seekins 20MOA base, and Seekins Lows... I used that exact setup with my 6-24x50MM PST and my SWFA 5-20x50MM. Best setup out there.

DK