Rifle Scopes Rings for S&B 5x25

[Ronin1973]

Need a little info. Will Seekins low rings work on a S&B 5x25 mounted on a Badger 20 moa base mounted on a Rem 700 with MTU contour barrel?
Thanks

 

[468shot]

Re: Rings for S&B 5x25

Go with the high rings. If you have flip caps it will still be close with the highs. I run badger 1.125 on the same setup and have plenty of clearance, but not excessive.

 

[Turk]

Re: Rings for S&B 5x25

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ronin1973</div><div class="ubbcode-body">Need a little info. Will Seekins low rings work on a S&B 5x25 mounted on a Badger 20 moa base mounted on a Rem 700 with MTU contour barrel?
Thanks </div></div>
No.

 

[Spuhr]

Re: Rings for S&B 5x25

1" Will work but not much lower

Håkan

 

[tman300wm]

Re: Rings for S&B 5x25

Good post and info. I had the same question and y'all just answered it for me.

Thanks,

 

[Rob01]

Re: Rings for S&B 5x25

Yup 1" height Seekins will work. Got them on a similar set up with a M40/M24 contour and there's plenty of room for the small amount of diameter different between it and the MTU.

 

[oldfatguy]

Re: Rings for S&B 5x25

Badger 1.0" high rings. Room for the Butler Creek caps on my Remmy 5R.

OFG