Hi to all I'm new here but have been viewing for a while now . I was given a Romanian Trainer that needs a couple parts for the bolt replaced according to the guy I got it from . I am looking for a parts source if anyone could point me to one .
Romian Trainer
- Thread starter ejk
- Start date
Numrich would be my suggestion.
When you get them in, check the headspace. I have a couple of those trainers and they have so many rounds cycled through them that the headspace is excessive from wear on the bolt lug/handle to the receiver.
A piece of brass shim stock will usually tell you how much material you need to add back in there. It can be easily added with a dab of TIG filler and shaped with a file or carefully with a dremel tool.
When you get them in, check the headspace. I have a couple of those trainers and they have so many rounds cycled through them that the headspace is excessive from wear on the bolt lug/handle to the receiver.
A piece of brass shim stock will usually tell you how much material you need to add back in there. It can be easily added with a dab of TIG filler and shaped with a file or carefully with a dremel tool.
Similar threads
