• Frank's Lesson's Contest

    We want to see your skills! Post a video between now and November 1st showing what you've learned from Frank's lessons and 3 people will be selected to win a free shirt. Good luck everyone!

    Create a channel Learn more
  • Having trouble using the site?

    Contact support

Rifle Scopes S&B 5-25X56 how many MOA on base?

pmclaine

Gunny Sergeant
Full Member
Minuteman
  • Nov 6, 2011
    35,923
    72,354
    56
    MA
    I'm double checking some info. I'm in the market for a S&B 5-25X56. I'm liking the Spuhr mount. A seller has suggested a 20MOA mount. I thought I had read somewhere that the S&B 5-25X56 may need more angle on the base to get the full range of elevation. Any thoughts on this?

    I will be shooting most often at 100 and 300 yards. With planning I will be able to access 600 yards. If I take a couple days off at some point I will be able to shoot on some private land and 800 yards would be the likely range maybe more. I'd like to be good to go from 100 to 1,000. The rifle will be a LMT MWS 16" CL, .308.

    PS - If you have any strong opinions on why I should go with a QD mount such as GDI over a machine screw mount for the scope I would appreciate hearing your thoughts.
     
    Re: S&B 5-25X56 how many MOA on base?

    Don't know what you are shootin,
    But I have a 20moa base on my .300 win mag with a Leupold Mark 4
    8.5x25x50 and have shot it to 1400 and did not run out of up on the scope. If that ain't enough call Ken Farrel.
    He made me a 60 moa for my .338 lapua ( remington action )Very nice base and I had it in about 2 weeks. But shooting at 100 ain't gonna happen unless you are holding under!
     
    Re: S&B 5-25X56 how many MOA on base?

    45 MOA for full range. Thank you for that info.

    Is there a "sweet spot" regards the scope adjustments? If I go 45 MOA do I lose something at the shorter ranges (less than 600) I will typically shoot?

    In MA the best I can hope for right now is 800-1000 yards once a year if I'm lucky, the rifle is a 16" .308 (maybe I'll buy an 18" at some point to bump up velocity a little), my intent is to reload using 168 grn bullets.

    If 45 moa allows more range with no costs on the short end I'll go that way even though I likely wont access the range potential.
     
    Re: S&B 5-25X56 how many MOA on base?

    Stick with a 20 MOA. If you get a 45 MOA and for some reason have to use alot of windage in the zeroing process it might not allpow a 100 yard zero. With a 20 MOA base you will still have around 16 mils or so of up elevation and lets face it with a 16" gas gun shooting 168s you will go subsonic way before you use all that.
    wink.gif
     
    Re: S&B 5-25X56 how many MOA on base?

    <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rob01</div><div class="ubbcode-body">Stick with a 20 MOA. If you get a 45 MOA and for some reason have to use alot of windage in the zeroing process it might not allpow a 100 yard zero. With a 20 MOA base you will still have around 16 mils or so of up elevation and lets face it with a 16" gas gun shooting 168s you will go subsonic way before you use all that.
    wink.gif
    </div></div>

    Perfect. Thank you for confirming a gut feeling I dont have the knowledge to understand.

    I'm talking to a site vendor concerning the possibilty of getting this 5-25 PMII in the FDE cerakote with an MSR reticle. I am 44 years old. What will happen? a) I get the scope as specd b) I will have died from old age when it ships?
     
    Re: S&B 5-25X56 how many MOA on base?

    A
    smile.gif


    You young whipper snappers. I will be 46 next month LOL
     
    Re: S&B 5-25X56 how many MOA on base?

    <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rob01</div><div class="ubbcode-body">A
    smile.gif


    You young whipper snappers. I will be 46 next month LOL </div></div>

    LOL! Rob01 YOU are a young whippersnapper! I'm certain there are some here that have been around more times but I've made 57 laps around our closest star so far.
     
    Re: S&B 5-25X56 how many MOA on base?

    <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pmclaine</div><div class="ubbcode-body">I'm double checking some info. I'm in the market for a S&B 5-25X56. I'm liking the Spuhr mount. A seller has suggested a 20MOA mount. I thought I had read somewhere that the S&B 5-25X56 may need more angle on the base to get the full range of elevation. Any thoughts on this?

    I will be shooting most often at 100 and 300 yards. With planning I will be able to access 600 yards. If I take a couple days off at some point I will be able to shoot on some private land and 800 yards would be the likely range maybe more. I'd like to be good to go from 100 to 1,000. The rifle will be a LMT MWS 16" CL, .308.

    PS - If you have any strong opinions on why I should go with a QD mount such as GDI over a machine screw mount for the scope I would appreciate hearing your thoughts. </div></div>
    Go to the S&B website and download the S&B PMII manual. You need to understand why S&B suggests using a higher cant base with this scope. Aries64 has also posted extensively on this subject if you want better clarity on the how and why of using a high cant base with big S&B PMII scopes. Use the search to find some of Aries64's posts before you do something you don't need to rush into.

    HTH!
     
    Re: S&B 5-25X56 how many MOA on base?

    <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Aries64</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: skkeeter</div><div class="ubbcode-body">I'm caught up in an optics dilemma. I'm new on here so please go easy on my ignorance. I currently own 2 Nightforce NSX 3-15x that reside on my .308 bolt gun and my DTA .338lm. I'm shooting up to 1100 yards with my current setup, but am finally looking for some more magnification so I can "attempt" to stretch my DTA out to 2000m. I'm an Moa/Moa guy so I really want to stay with this system. I'm willing to spend a considerable amount of $ on a new quality optic.</div></div>
    I'll go easy on you, just like I do on everyone. However, new here or not, <span style="font-weight: bold"><span style="font-style: italic">bth87</span></span> is correct and I don't blame him/her for telling you to use the <span style="font-style: italic">"Search"</span> function. A lot of people are just too lazy to search and want to be spoon-fed, and forum members get tired of the lazy attitude and lame excuse that <span style="font-style: italic">"the search function didn't turn up anything."</span> The <span style="font-style: italic">"Advanced Search</span> actually works very well <span style="font-weight: bold"><span style="font-style: italic">as long as the user exercises common sense and uses relevant "keywords" to search with.</span></span> Garbage-in, garbage-out. There are tons of <span style="font-style: italic">"Premier, S & B, or Nightforce"</span> ect, threads on Sniper's Hide and finding them is very easy.

    <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: skkeeter</div><div class="ubbcode-body">I'm torn between the Schmidt Bender PMII 5-25x56 L/P P4 MOA DT CW FFP, and the Premier Heritage Tactical Scope 5-25x56 Illum. MOA Reticle PRH-10011. I'm not even sure if this Premier model is even available yet.</div></div>
    Both the PMII and the Heritage scopes have been available with (matching) MOA Reticle & MOA Turrets for more than a year.

    <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: skkeeter</div><div class="ubbcode-body">It looks like the S&B is available now through Eurooptic, but it only has 56 MOA of elevation travel. I've heard the S&B glass is unmatched, but know that 56 Moa of elevation travel won't get me out to the distances I want to shoot.</div></div>
    The Elevation travel specification on the EuroOptic web site in incorrect, just as it is incorrect on most other vendor web sites who copied S & B scope specifications from the Schmidt & Bender web site instead of consulting the S & B catalog and verifying the data with S & B. It isn't <span style="font-style: italic">entirely</span> the vendors fault, as the S & B web site had inaccurate verbiage about the PMII 5-25X56mm's Elevation travel on one page of the PMII main page for years that could be confusing if one didn't read through the specifications, discover the discrepancy, and put two and two together.

    However, I expect more from vendors - they should know more about the products they sell than the consumers. Especially considering the prices of optics. The good news is that S & B has a new web site, and while I haven't gone through it yet I surmise that the erroneous descriptions and incorrect data I saw in the past have probably been removed.

    <span style="font-weight: bold">The Elevation travel on the PMII 5-25X56mm with Standard DT 1/4 MOA Turrets is IS NOT 56 MOA. It is 65 MOA.</span>

    <span style="font-weight: bold">NOTE:</span> In reference to my statement directly above, I should re-phrase and say that <span style="font-weight: bold"><span style="font-style: italic">"for all practical purposes"</span></span> the 1/4 MOA version of the PMII 5-25X[56] has 65 MOA of Elevation adjustment. S & B service technicians have stated that the 1/4 MOA and 0.1 MRAD versions of the PMII 5-25X[56] DTs' use the same Erector Assembly (so they have the same <span style="font-style: italic">potential</span> amount of adjustment). However, the 1/4 MOA Turret "dial" has a stop pin at 65 MOA on the second revolution. Forcing the Turret past the stop pin will damage the Dial and Turret. Therefore, <span style="font-weight: bold"><span style="font-style: italic">"for all practical purposes"</span></span> the 1/4 MOA version of the PMII 5-25X[56] has 65 MOA of Elevation adjustment.

    <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: skkeeter</div><div class="ubbcode-body"> The Premier has 96 Moa of travel which would do the job. My backup plan is to just stick with Nightforce and get the 5-22x56. What do you guys think? </div></div>
    While I prefer PMIIs' to Premier scopes, I do think that Premier makes great scopes and that the 31 MOA Elevation adjustment advantage that the 1/4 MOA version Premier 5-25X[56] has over the 1/4 MOA version of the PMII 5-25X[56] is a big advantage in favor of the Premier. If it was me and I was going 0.1 MRAD I'd go with a PMII no contest.

    Nightforce makes great scopes - super Quality Control, great turrets, excellent clarity, and a wide range of reticles. So far, Nightforce's only FFP scope is the (3-15X[50]) F1, and 15X on the top isn't nearly enough magnification for 2,000 meters. I don't know what your time frame is, but if you can wait until Nightforce releases their next FFP scope it could be the ticket.

    I've owned and used a Premier Heritage 27 MIL DT MTC Gen 2 XR (CCW) alongside a PMII 5-25X56mm 26 MIL DT Gen 2 XR CCW, and the optical quality is so very close so it's really a "toss-up" between the two for optical performance. Both scopes possess traits that may or may not appeal to individual users. I prefer a PMII 5-25X[56] DT 0.1 MRAD Gen 2 XR CCW to the Premier, but YMMV. You have to get behind the respective potential scopes' side-by-side at the range, or at least see them both side-by-side at the store.

    One thing that I will spoon-feed you is that you should use a 40-45 MOA base cant with a 1/4 MOA version of the PMII 5-25X[56]. Below is the correct procedure of how to determine and select the correct cant (forward slope) for your rifle in order to get full Elevation adjustment out of a PMII, which you will need in order to stretch out to 2,000 meters (especially if you handicap yourself with the 1/4 MOA version of the PMII). The 1/4 MOA version of the PMI 5-25X[56] has 65 MOA of Elevation adjustment, while the 0.1 MRAD version of the PMII 5-25X[56] has 26 MILs' (roughly equivalent to 90 MOA).

    <span style="font-weight: bold">PMIIs' are designed and engineered to be used with aggressively canted bases. PMII variables' are preset at the S & B factory with their reticles' adjusted out-of-center by HALF of their FULL Elevation travel, giving them UPWARD Elevation bias. In order to compensate for this mechanical bias/offset, a base that approximates one half of each respective scope's full Elevation travel should be used.</span> However, its' a good idea to get a base with a few "extra" MOA built-in to allow for the travel you'll use to zero at 100 yards.

    Selection of a base with the correct cant is all detailed in the <span style="font-weight: bold"><span style="font-style: italic">"2006 PMII User Manual"</span></span> beginning on page 3 under <span style="font-weight: bold"><span style="font-style: italic">"Section 4.2"</span></span>, <span style="font-weight: bold"><span style="font-style: italic">"Adjustment range and forward angle"</span></span> and concluding on page 4. Italicized and in quotation marks below is the section I am speaking of. Below the text of Section 4.2 is a diagram from page 19 of the PMII User Manual showing <span style="font-style: italic">"picture 2"</span>, <span style="font-style: italic">"picture 3"</span>, and <span style="font-style: italic">"picture 4"</span> as referenced in the (2006) User Manual. Keep in mind that the Manual does not allow for any travel used to "zero" the scope as I did in my paragraph above.

    <span style="font-weight: bold"><span style="font-style: italic">"4.2. Adjustment range and forward angle

    Scopes for high precision shooting are often used for shooting at great
    distances. In this case the elevation adjustment is used to compensate for bullet
    drop. To provide an extensive elevation range in these scopes Schmidt &
    Bender has increased the main tube diameter from 30mm to 34mm.
    Nevertheless the elevation and windage range like in any other scope is limited.

    In scopes for hunting the reticle is generally centered optically and mechanically
    in order to receive the same amount of travel in all directions and to make the
    mounting of the scope to the firearm easier (see picture 2).

    In order to make the elevation adjustment range usable in its full extent it is
    necessary to preset the reticle of the PMII scopes out of the center already at
    the Schmidt & Bender factory (see picture 3). As a consequence the gunsmith
    is obliged to consider the preset position of the reticle in the elevation range
    when mounting the scope to the firearm (see picture 4). With this setup the full
    elevation range is usable in one direction allowing to shoot at distances up to
    2000m depending on the used calibre and scope type.

    Determining the correct forward angle
    The necessary forward angle is depending on the used type of elevation
    adjustment. At the Schmidt & Bender factory the reticles of PMII scopes are
    adjusted out of center by half the amount of the full elevation range. This value
    must be compensated in the mount system.
    Forward angled mounts or rails for every Schmidt & Bender PMII scope type
    are available from all renowned mount manufacturers.

    Example for determining the required forward angle:
    A standard elevation turret (Single Turn) with an elevation range of 13mrad
    (equals 130cm at 100m distance) requires a forward angle of 65cm at 100m
    (equalling the half of the full elevation range). For a gunsmith compensating for
    this value using the mounts the following rule of thumb applies: If the space
    between the two mount rings is 100mm the front mount should be 0.65mm
    lower than the rear mount.

    If the gunsmith is using a forward angled rail standard mount rings without
    forward angled can be used."</span></span>

    <span style="font-weight: bold"><span style="font-style: italic">"picture 2"</span>, <span style="font-style: italic">"picture 3"</span>, and <span style="font-style: italic">"picture 4"</span> as referenced in the <span style="font-style: italic">2006 PMII User Manual:</span></span>
    SBPictures800x531.jpg



    <span style="font-weight: bold"><span style="text-decoration: underline">NOTE:</span></span> <span style="font-weight: bold"><span style="font-style: italic">In the diagram above:</span></span>

    <span style="font-weight: bold">"<span style="color: #FF0000">Picture 2</span>"</span> shows a scope mounted on a rifle with a flat (non-canted base). The drawing illustrates a typical scope with optically-centered reticle and erector. Personally, I always use canted bases, as they have no downside - they don't adversely affect 100 yard zeroing and shift a bit of Elevation travel to the upper end of the scope's adjustment range. <span style="font-weight: bold"><span style="font-style: italic">PMIIs' are actually designed to use agressively-canted bases.</span></span>

    <span style="font-weight: bold">"<span style="color: #FF0000">Picture 3</span>"</span> shows a scope mounted on a rifle with a flat (non-canted base). The drawing illustrates the effect that the PMII's Reticle offset (PMII reticle's are preset at the factory <span style="text-decoration: underline">biased towards the top of the scope tube</span>) has upon the PMII's operation and the PMII's requirement for specific cant scope bases. This mechanical offset is engineered into the PMIIs' and requires use of specific cant bases in order to get optimum Elevation travel out of respective PMII scopes. The Reticle's off-center orientation (towards the top of the tube) means that you're actually looking very slightly upward when you look through a PMII at the bottom of it's travel, and that the Reticle's LOS (Line-of-Sight) won't intersect the projectile's trajectory without a lot of "UP" adjustment. Obviously, the scope's offset over the bore will require the shooter to use a lot of "UP" adjustment to zero the rifle. Use of a correct cant base eliminates these issues and allows the PMII to function as designed.

    <span style="font-weight: bold">"<span style="color: #FF0000">Picture 4</span>"</span> shows a scope mounted on a rifle with a canted base. The drawing illustrates how the use of a base with the correct cant affects the PMII Reticle's LOS (Line-of-Sight) and allows the respective PMII access to it's full Elevation adjustment range. The Reticle is still oriented at the top of the scope tube, but the canted base has angled the scope (and Reticle) slightly downward in relation to the axis of the bore, allowing the Reticle's LOS (Line-of-Sight) to intersect with the projectile's trajectory. The scope can now be "zeroed" with minimal Elevation adjustment. After the scope is zeroed, the Elevation Turret shoud be set to "0". Scopes with DT (Double Turn) Elevation Turrets should be reset.

    Also, the illustrations show the bullets arcing upward from the axis of the bores. This, of course - does not occur in real life. I'm sure that the gravity-defying bullets were drawn in that manner to simulate the arc of the rounds as they travel downrange.

    <span style="font-weight: bold"><span style="font-style: italic">The math:</span></span>

    65 MOA = 65 x 1.047" = 68.055"

    68.055" divided by 2 = 34.0275"

    Add 5 MOA for a 100 yard zero (common example) and you want about a 40 MOA base cant.


    Keith </div></div>
     
    Re: S&B 5-25X56 how many MOA on base?

    I dont agree with this!

    Generelly speaking halv elevation is maximum tilltog all scopes.
    A 5-25 mil scope Have 26mils elevation/93 moa.
    And to reach full elevation of the scope 45 Moa is needed.

    BUT
    The person WHO asks says he is shooting from 100-600 meters and at 1000 occasinally.
    So there is no need for reaching full elevation!

    The disadvantage with full elevation is a somewhat degraded picture quality on the extremes, on 100-300 meters as well as the futher extreme, and that is due to that when using the scope at its extremes the picture gets oval and not that nice.

    That is ok when needing full elevation, but for the user who shoots mainly at 100-300 its annoying and unneccesary.

    So in short, you be fine with 20-30 Moa tilt for your described use.

    Håkan
     
    Re: S&B 5-25X56 how many MOA on base?

    Thank you Hakan,

    This is an old post revived. My apologies to anyone offended by taking the bandwith.

    I will be overscoped for the caliber, the rifle, the distances and my skills but hey you only live once. The distances I mentioned are realistic. 100,200 and 300 are readily accesible at my club. Getting beyond that will require some planning and travel so it will happen infrequently.

    I'm better cheating my cant toward the low end rather than having a 2000 meter scope on a .308 AR.

    As an aside a Spuhr 20 moa base sits at the vendor waiting for the arrival of my scope so both can ship together. I thank you for your help back when this purchase was being considered and now when the trigger has been pulled.

    Hakan if I could intrude on you once more - seeing as you are closer to Schmidts build facility could you drop in and put your foot in somebodys ass to get my scope shipped here quicker?

    Thank you.

    Phil McLaine