So I went to the range Saturday to re-sight in my S&W MP-15 after installing some new scope mounts and realized how much I hate the stock trigger in this gun. Would something like a RRA 2-stage be a big improvement? I really can't afford a Geisslle (sp?). Any other suggestions?
S & W stock trigger
- Thread starter tomcat mv
- Start date
Re: S & W stock trigger
You'll notice improvement from the stock M&P AR trigger to the RRA 2-stage NM, but it is purely subjective in terms of whether it is "a big improvement" or not.
As for the Geissele triggers...while expensive...they are arguably the single finest AR triggers available at this time in my experience/opinion. If you can hold off an extra couple of paychecks, the Geissele trigger will be worth the wait and extra cash.
In the meantime, you might try some of the typical "home remedies" as far as AR trigger jobs are concerned to see if you can't make your current trigger a little better while you save up for the Geissele!
You'll notice improvement from the stock M&P AR trigger to the RRA 2-stage NM, but it is purely subjective in terms of whether it is "a big improvement" or not.
As for the Geissele triggers...while expensive...they are arguably the single finest AR triggers available at this time in my experience/opinion. If you can hold off an extra couple of paychecks, the Geissele trigger will be worth the wait and extra cash.
In the meantime, you might try some of the typical "home remedies" as far as AR trigger jobs are concerned to see if you can't make your current trigger a little better while you save up for the Geissele!
Re: S & W stock trigger
ALG is what you're thinking of. Refined mil-spec, much improved feel and close to minimum mil-spec pull weights.
Cheapest route, polish yours up. Second cheapest get yellow JP springs, they come with polishing instructions. Did this, ok with the results.
Only non mil-spec stock one I have experience with is CMMG's two stage, its low cost, its not great, decent feel but very heavy, may try JP springs in it. I don't recommend it as is.
ALG is what you're thinking of. Refined mil-spec, much improved feel and close to minimum mil-spec pull weights.
Cheapest route, polish yours up. Second cheapest get yellow JP springs, they come with polishing instructions. Did this, ok with the results.
Only non mil-spec stock one I have experience with is CMMG's two stage, its low cost, its not great, decent feel but very heavy, may try JP springs in it. I don't recommend it as is.
Re: S & W stock trigger
Save for an SSA trigger if you want the best. You'll be happy in the end.
Save for an SSA trigger if you want the best. You'll be happy in the end.
Re: S & W stock trigger
I love single stage triggers and went with Timney 4lb triggers in my S&W 15 Sport and in my LR 308. Absolutely fantastic triggers. Not cheap but worth every penny paid!
I love single stage triggers and went with Timney 4lb triggers in my S&W 15 Sport and in my LR 308. Absolutely fantastic triggers. Not cheap but worth every penny paid!
Re: S & W stock trigger
As others have stated, if you want a trigger, I'd strongly suggest saving up for the Geissle SSA.
As others have stated, if you want a trigger, I'd strongly suggest saving up for the Geissle SSA.
Similar threads
