SASS question
- Thread starter opeagle
- Start date
Re: SASS question
The 308 (SASS) has a larger diameter than the 223 (AR15). Larger bolt, carrier, etc . . .
Let me know if you want measurements.
The 308 (SASS) has a larger diameter than the 223 (AR15). Larger bolt, carrier, etc . . .
Let me know if you want measurements.
Re: SASS question
DPMS SASS? If so mine has an ar15 a2 buffer tube and it runs fine, no problems.
DPMS SASS? If so mine has an ar15 a2 buffer tube and it runs fine, no problems.
Re: SASS question
Both the DPMS SASS and the Armalite SASS use a standard A2 rifle receiver extension (buffer tube) that is found on any AR-15. There is no difference in the diameter of the A2 tubes.
The Commercial vs. Mil-spec receiver extension diameter differences only come in to play with carbine stocks. Additionally, the true Armalite AR-10 carbine receiver extensions are also a little longer than the standard AR-15 carbine tubes.
Both the DPMS SASS and the Armalite SASS use a standard A2 rifle receiver extension (buffer tube) that is found on any AR-15. There is no difference in the diameter of the A2 tubes.
The Commercial vs. Mil-spec receiver extension diameter differences only come in to play with carbine stocks. Additionally, the true Armalite AR-10 carbine receiver extensions are also a little longer than the standard AR-15 carbine tubes.
Re: SASS question
Yes the rifle is reported to me as a DPMS SASS. I will let the Guy know he should be OK.
His origional request was to shorten the LOP. I was unsure of the diameter thus unable to advise.
Anyone have any suggestions other than the Magpull? I think that would be a bit out of his price range right now.
Yes the rifle is reported to me as a DPMS SASS. I will let the Guy know he should be OK.
His origional request was to shorten the LOP. I was unsure of the diameter thus unable to advise.
Anyone have any suggestions other than the Magpull? I think that would be a bit out of his price range right now.
Re: SASS question
If he wants to shorten the LOP, there are several options:
1) find an A1 buttstock, pull the A2 off, remove the A2 spacer, install the A1 (should get him a reduction of 5/8");
2) get the Magpul PRS for the AR-10/SR-25 (same reduction above. with adjustability);
3) Move to a carbine stock setup.
If he wants to shorten the LOP, there are several options:
1) find an A1 buttstock, pull the A2 off, remove the A2 spacer, install the A1 (should get him a reduction of 5/8");
2) get the Magpul PRS for the AR-10/SR-25 (same reduction above. with adjustability);
3) Move to a carbine stock setup.
Re: SASS question
Try a carbine style stock. I'd go with a magpul it's worth the money. If he's not picky though the dpms carbine 308 one comes with all the necessary parts for 69$. Some electrical tape on the tube and it was fairly firm although I was never completely satisfied with it.
Why shorten it? Usually people want more not less. I'm a little guy and a standard A2 fits me great.
Try a carbine style stock. I'd go with a magpul it's worth the money. If he's not picky though the dpms carbine 308 one comes with all the necessary parts for 69$. Some electrical tape on the tube and it was fairly firm although I was never completely satisfied with it.
Why shorten it? Usually people want more not less. I'm a little guy and a standard A2 fits me great.
Re: SASS question
Be sure if you start to change buffer tubes that you use a milspec or solid formed buffer tube some of the non-OEM tubes are welded and they don't stand up to the heavier recoil of the .308.
Be sure if you start to change buffer tubes that you use a milspec or solid formed buffer tube some of the non-OEM tubes are welded and they don't stand up to the heavier recoil of the .308.
Re: SASS question
sass or mini sass? if it's a mini sass it would be a a2 size buffer, if it the 308 sass completely different from ar15
sass or mini sass? if it's a mini sass it would be a a2 size buffer, if it the 308 sass completely different from ar15
Re: SASS question
.308 sass bolt next to a mini sass bolt
that will give you an idea of the buffer
.308 sass bolt next to a mini sass bolt
that will give you an idea of the buffer
Re: SASS question
The buffer tubes on both fifle are the same dimension. Diameter and length. As you can see in the picture above the .308 colt carrier has a lerger diameter in the front where the bolt rides but reduces behind the gas key. This dimension is the same as the AR15.
The buffer tubes on both fifle are the same dimension. Diameter and length. As you can see in the picture above the .308 colt carrier has a lerger diameter in the front where the bolt rides but reduces behind the gas key. This dimension is the same as the AR15.
Re: SASS question
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: M25BeastShooter</div><div class="ubbcode-body">The buffer tubes on both fifle are the same dimension. Diameter and length. As you can see in the picture above the .308 colt carrier has a lerger diameter in the front where the bolt rides but reduces behind the gas key. This dimension is the same as the AR15.</div></div>
I just went to rip it apart and you're right, I thought they were different.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: M25BeastShooter</div><div class="ubbcode-body">The buffer tubes on both fifle are the same dimension. Diameter and length. As you can see in the picture above the .308 colt carrier has a lerger diameter in the front where the bolt rides but reduces behind the gas key. This dimension is the same as the AR15.</div></div>
I just went to rip it apart and you're right, I thought they were different.
