I have an LRP in .260 and a NightForce 5.5-22X50 NXS. Thinking about getting the "EGW HD Picatinny Rail 1 Piece Scope Mount" and slapping a pair of badgers on it. Should I go with the .823 or the .885 rings?
Savage LRP (.260): Ring height question.
- Thread starter Little Yoshi
- Start date
Re: Savage LRP (.260): Ring height question.
This may not help either, I had the Savage Model 12 F Class, barrel contour similar to the LRP,and needed Badger Ordnance medium highs 1". Scope was NF 56mm and not much room between the barrel and the scope. Good luck.
DV
This may not help either, I had the Savage Model 12 F Class, barrel contour similar to the LRP,and needed Badger Ordnance medium highs 1". Scope was NF 56mm and not much room between the barrel and the scope. Good luck.
DV
Re: Savage LRP (.260): Ring height question.
I have the same gun with the egw 20 moa rail and a vortex viper pst. The objective is 56 mm and i used egw low rings which are .850. It gave me about a quarter inch from barrel to scope. I hope that helps.
I have the same gun with the egw 20 moa rail and a vortex viper pst. The objective is 56 mm and i used egw low rings which are .850. It gave me about a quarter inch from barrel to scope. I hope that helps.
