Suppressors SBR carrier tilt on DI or GP

[BOL556]

Curious if any one is having issues with carrier tilt (bolt tilt) on their SBR's either DI or GP with a can. I am only asking because I had this problem with a 16" AR while running suppressed. also wondering if anyone is using the Adams arms SBR in any config. If I had carrier tilt in a 16" barrel suppressed then the same should apply to the SBR's in DI. Attempting to not make the same mistake as i did with the 16" DI with a carbine length gas system. From all the research I have done if you want to run a can on a AR it should be either GP or mid length or higher.

Thanks for the replies in advance.

 

[Chucky]

Re: SBR carrier tilt on DI or GP

I have multiple SBR's that I am running suppressed for demo's and I haven't seen this problem with my any of my guns. I am running a 10.5 LWRC 5.56, 12.7 Noveske in 6.8,14.5 LMT in 5.56 and a 14.5 LMT in 6.8. I also have 4 other Ar variants that I shoot suppressed and no issues with any of those either. I am not running a piston conversion on any of my guns though.