i know this isnt a supressor question but it is an NFA question, so here it goes. I want to have one of my AR's shortened and put a can on it. my question is can i just chopp the 16inch i have now and register it? or do i need to order and complete upper or complete gun? or just a barrel and register the one of the lowers I have? not sure how that all works.
Suppressors SBR
- Thread starter pistolpacknpete
- Start date
Re: SBR
so what actually gets registered? the upper or the whole gun? since uppers dont have serial numbers
so what actually gets registered? the upper or the whole gun? since uppers dont have serial numbers
Re: SBR
If you form one it you have to wait until the form is back, If a Manufacturer does it they have to hold it while the paperwork is being processed
If you form one it you have to wait until the form is back, If a Manufacturer does it they have to hold it while the paperwork is being processed
Re: SBR
Where does he say he wants a 7" barrel?
You could chop your 16" but would probably need the gas port opened up as well unless you plan to shoot suppressed most/all the time. I would personally sell it and purchase whatever barrel length upper you intend to use.
You don't need a complete gun unless you want a factory SBR that's already registered as one.
Where does he say he wants a 7" barrel?
You could chop your 16" but would probably need the gas port opened up as well unless you plan to shoot suppressed most/all the time. I would personally sell it and purchase whatever barrel length upper you intend to use.
You don't need a complete gun unless you want a factory SBR that's already registered as one.
Re: SBR
i have like 4 ar's one is three gun, one is a back up for three gun, and one is a trainer for three gun (22) and one is a 20 inch precision/ varminter and i dont really have a "cool" AR so i thought maybe i should build a shorty. i just ordered my first can and already looking at buying another so thats why i want a shorty. just something short supressed that i can shoot for fun no other reason
i have like 4 ar's one is three gun, one is a back up for three gun, and one is a trainer for three gun (22) and one is a 20 inch precision/ varminter and i dont really have a "cool" AR so i thought maybe i should build a shorty. i just ordered my first can and already looking at buying another so thats why i want a shorty. just something short supressed that i can shoot for fun no other reason
Re: SBR
If you like a DI gun take a look at LMT's MRP system and SBR uppers.... A teensy spendy but te system rocks...
As far as building I personally wouldn't go shorter than 10" as it is known to cause excessive wear on the suppressor baffles and voids a lot of mfr. warranties. If you do build you have to do the paperwork for a Form 1, You have to get the lower you choose engraved with your name/the name of your trust, and our city and state. AFTER you get the form 1 back you can perform your build. While you are doing the barrel swap on the upper bio ahead and put on some rails. A local gunsmith would be good to o to if you have any issues.
If you like a DI gun take a look at LMT's MRP system and SBR uppers.... A teensy spendy but te system rocks...
As far as building I personally wouldn't go shorter than 10" as it is known to cause excessive wear on the suppressor baffles and voids a lot of mfr. warranties. If you do build you have to do the paperwork for a Form 1, You have to get the lower you choose engraved with your name/the name of your trust, and our city and state. AFTER you get the form 1 back you can perform your build. While you are doing the barrel swap on the upper bio ahead and put on some rails. A local gunsmith would be good to o to if you have any issues.
Re: SBR
I know my way around ar's pretty well, mostly for three gun and prairie dogs or dmr. I haven't built one for the coolness factor yet. So well see how it goes
I know my way around ar's pretty well, mostly for three gun and prairie dogs or dmr. I haven't built one for the coolness factor yet. So well see how it goes
Re: SBR
You can Form 1 your lower, just dont! buy or shorten up your barrel until you get your form 1 back approved from the atf.
Dont go with a 7" barrel if you want to suppress it. Go minimal 10.25" on the barrel. I went 11" the short barrels are kind of hard on the cans.
I have been around this topic mannny times PM if you need any advice or question.
I think I have posted a pic of my baby on here somewhere.
You can Form 1 your lower, just dont! buy or shorten up your barrel until you get your form 1 back approved from the atf.
Dont go with a 7" barrel if you want to suppress it. Go minimal 10.25" on the barrel. I went 11" the short barrels are kind of hard on the cans.
I have been around this topic mannny times PM if you need any advice or question.
I think I have posted a pic of my baby on here somewhere.
Re: SBR
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Texasshooter30</div><div class="ubbcode-body">You can Form 1 your lower, just dont! buy or shorten up your barrel until you get your form 1 back approved from the atf.
Dont go with a 7" barrel if you want to suppress it. Go minimal 10.25" on the barrel. I went 11" the short barrels are kind of hard on the cans.
I have been around this topic mannny times PM if you need any advice or question.
I think I have posted a pic of my baby on here somewhere. </div></div>
i looked for your rifle but there was no pictures. i would like to see some and know the process exactly and how u did it
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Texasshooter30</div><div class="ubbcode-body">You can Form 1 your lower, just dont! buy or shorten up your barrel until you get your form 1 back approved from the atf.
Dont go with a 7" barrel if you want to suppress it. Go minimal 10.25" on the barrel. I went 11" the short barrels are kind of hard on the cans.
I have been around this topic mannny times PM if you need any advice or question.
I think I have posted a pic of my baby on here somewhere. </div></div>
i looked for your rifle but there was no pictures. i would like to see some and know the process exactly and how u did it
