Scenar bullets
- Thread starter jyd
- Start date
Re: Scenar bullets
Their version of moly coat. Probably waxed over too. I like but since I went to hBN it's no longer viable.
Their version of moly coat. Probably waxed over too. I like but since I went to hBN it's no longer viable.
Re: Scenar bullets
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JYD</div><div class="ubbcode-body">Does anyone know what silver jacket is on the Secnar bullets? Or what it's purpose is. All I know is that they cost more. JYD</div></div>
Molybdenum
You can google it's purpose. If you don't read enough of other people arguing with each other about whether it's good or bad, just start a new topic here and I'm sure you'll get more arguing.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JYD</div><div class="ubbcode-body">Does anyone know what silver jacket is on the Secnar bullets? Or what it's purpose is. All I know is that they cost more. JYD</div></div>
Molybdenum
You can google it's purpose. If you don't read enough of other people arguing with each other about whether it's good or bad, just start a new topic here and I'm sure you'll get more arguing.
Re: Scenar bullets
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JYD</div><div class="ubbcode-body">Thanks for the info, I thought it was their version of something slick but it didn't seem to rub off. JYD </div></div>
Actually, when you apply moly properly, you're pounding it into the pores of the gilding metal jacket and once you tumble off the residue, you don't get much on your fingers.
I've got the Lyman moly kit and it works pretty well. Guys using the coffee can and BBs method, usually don't tumble off this residue and so the bullets are messier to handle.
At one point, I did 1000 .338 300gr SMKs and you could pick your nose after handling them, it was embeded that well.
Chris
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JYD</div><div class="ubbcode-body">Thanks for the info, I thought it was their version of something slick but it didn't seem to rub off. JYD </div></div>
Actually, when you apply moly properly, you're pounding it into the pores of the gilding metal jacket and once you tumble off the residue, you don't get much on your fingers.
I've got the Lyman moly kit and it works pretty well. Guys using the coffee can and BBs method, usually don't tumble off this residue and so the bullets are messier to handle.
At one point, I did 1000 .338 300gr SMKs and you could pick your nose after handling them, it was embeded that well.
Chris
