Rifle Scopes scope ring size help

[Finz08]

Hey i'm buying a s&b pm2 and trying to figure out how high i need my rings to be. Any Help Please

 

[mateofeo85]

The S&B PMII's I have (56mm OBJ) are sitting in Badger Ordnance High (1" from top of rail to middle tube) rings on TRG-22's. About as close as I'd like to get to make sure objective lens clears with Butler Creek caps.

 

[ZiaHunter]

For my PMII with the 50 mm objective using Seekins low rings on a STAR which barely leaves enough room for the Tenebraex covers. PMII with a 56 mm objective I use 1.125" Badger rings rings on a rifle with a Light 16 Palma contour. Both have 20 MOA rails.

 

[jsragman]

I called Seekins last week with that very question and they were extremely helpful. Give 'em a try.

 

[BobinNC]

S&B PM II's come with 30mm and 34mm tubes with the following objective sizes:

20mm
24mm
42mm
50mm
56mm

So telling us exactly which PM II your buying would be helpful for an intelligent answer. Unintelligent answers are of course always free here for the asking...

 

[Finz08]

34mm tube with 56 mm objective