Rifle Scopes Should I have a pro mount my scope?

[kanej]

So, forgive me if this is a noob question. Suppose you had a smb PMII and ferrel rings and base (rail). Is mounting as simple as putting the scope in the rings and tightening?

or

Do the rings still need to be checked for alignment, lapped, etc? Should bottom rings be glued to the scope tube? (the smb manual suggests this)

or

Should I just have it mounted by a pro?

 

[Boomholzer]

Re: Should I have a pro mount my scope?

Base to receiver fit can be a issue and different people have different opinions on bedding or use of lok-tite. This is also very receiver/rifle dependant.

You need a torque wrench at a minimum.

I have'nt heard/read the Ferrel name in some time but my experience with them was very good. I would not fret on the need for ring lappping.

I have had the fortune of mounting many a scope over decades that started with <<$100 optics. Your starting with a >$3k unit. If you have to ask, don't do it as too much investment is at risk for a initial learning experience. On the other end, I would not trust anyone from a big-box gun counter to do it for me (or you!). Perhaps you can locate a trusted local smith and observe.


<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Should bottom rings be glued to the scope tube? </div></div>
No.

 

[Chris@InterstateGuns]

Re: Should I have a pro mount my scope?

I would find someone that has done it before and have them stand over your shoulder while <span style="text-decoration: underline">you</span> do it.

You could bring it somewhere and have it done, but where's the fun in that. I like learning new things so having someone instruct me but watching me at the same time so I don't booger it up is the way to go.

If you aren't comfortable doing itself at least bring it somewhere you trust.

 

[fastbs]

Re: Should I have a pro mount my scope?

If you post you approximate location there may be someone on here with the tools that would help you out and not even charge you anything.

 

[jasonk]

Re: Should I have a pro mount my scope?

It's really quite simple and often taking it to a "pro" at the local sporting goods shop is much worse than stumbling through on your own.

You're obviously not a poor man since you have nice gear, spend a few bucks and get the Borka wrench kit, you'll use it at least a hundred times in your shooting life.

If you want a 5 minute phone call to hit some basics I'd be happy to, just pm me. It's not rocket science and I'm sure you'll be fine with it.

I see you're in AZ, there is a great group of shooters down there, I'm sure one of them would be happy to meet you at the range with the 3 or so basic things you'll need and help you get it going if you'd like. I can get you a few names if you'd like.

Jason

 

[Lowe Left]

Re: Should I have a pro mount my scope?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jasonk</div><div class="ubbcode-body">
I see you're in AZ, there is a great group of shooters down there, I'm sure one of them would be happy to meet you at the range with the 3 or so basic things you'll need and help you get it going if you'd like. I can get you a few names if you'd like.

Jason</div></div>

I was just going to ask to have him fill out his profile. I too know many shooters in the greater PHX area that can assist/help. I've never mounted the prestigous S&B, but have mounted Leupold, USO, NF and Bushnells if that's close enough

PM for more info...

 

[fergchri]

Re: Should I have a pro mount my scope?

I say try it yourself. I recently mounted my own scope for the first time and it was not as bad as you might imagine. I highly recommend you get a Borka torque wrench and read up. There are some great step by step articles or links on the hide that will make it all seem easy.