Suppressors SiCo’s new flow thru design

[CStroud]

Reckon this is about the least amount of back pressure you’ll ever see through a “suppressor”.

 

[Jcarpenter223]

hOw kWiYeT iZiT

 

[021411]

Very early Omegas had issues with the outer sleeve. I’m sure they’ll repair it if you still have the core.

 

[CStroud]

Yeh it’s been an issue for a long time. I finally emailed them and their response was to tell me how I could fix it, like I haven’t already tried their suggestions. I’ll send it in eventually. It’s been a great can in the 10 years I’ve had it other than this issue and one other.

 

[021411]

My Omega is in the 13xxx serial number range and I had issues with the sleeve as well. I think I ended up using red loctite on it and haven’t had issues since. Got that can in 2016.

 

[hafejd30]

What omega is this? I have a 36M my BIL has a omega 300

My welds on my 36M look like it went to a high school shop class but the cans been awesome

 

[CStroud]

It’s the original 300 with the anchor brake. Funny now how everyone is bonkers over suppressors with brakes and SICo did it 10 years ago.

 

[CStroud]

My Omega is in the 13xxx serial number range and I had issues with the sleeve as well. I think I ended up using red loctite on it and haven’t had issues since. Got that can in 2016.

Yeh the sleeve is one thing but the DT mount is stuck in the can and that’s a whole nother thing entirely. I’m soaking it in CLR once again to see if it will break free or not.

 

[hafejd30]

It’s the original 300 with the anchor brake. Funny now how everyone is bonkers over suppressors with brakes and SICo did it 10 years ago.

Yeah and the ASR are some of the cheapest as well

I have the omega 36M and Saker 556. Both awesome cans

 

[hafejd30]

Yeh the sleeve is one thing but the DT mount is stuck in the can and that’s a whole nother thing entirely. I’m soaking it in CLR once again to see if it will break free or not.

Maybe a soak in hot water or soaked in kroil

 

[CStroud]

Maybe a soak in hot water or soaked in kroil

Tried kroil years ago along with clr and it didn’t budge. I’ll keep messing with it.

 

[hafejd30]

Tried kroil years ago along with clr and it didn’t budge. I’ll keep messing with it.

Could heat the can up shooting and try it. I shot a LE qualifier course with mine. Was so hot I left it in the back of my truck to cool

Was insanely carbon locked as well. Those carbon locks are no joke haha

 

[021411]

Been there done that but luckily a BFH and a wrench removed my mount.

 

[CStroud]

Got the mount unstuck. 72 hrs in clr, and tapping lightly on the outside of the base of the can with a hammer and it broke free with moderate effort.

 

[spife7980]

Been there done that but luckily a BFH and a wrench removed my mount.