Re: Signature Zee rings angled inserts
They should come paired up in the package, I assume these are 1" because the 30mm only go up to the 10.
It should be two halves to equal the whole(obvious) a +20 and -20, a +10 and -10, a +5 and -5
You want to keep these halves together, if you want a 20moa adjustment, put the -20 on the bottom of your front ring and the +20 on the top of that ring, then the 0 inserts in the back ring.
If you want 30moa of adjustment, do that same 20 setup in the front, but have the +10 on the bottom in the back with the -10 on the top.
But, again, keep the 5s, 10s, and 20s together as their sets, don't use a 5 top with a 10 bottom...
Put something on the inside of the rings before you put the inserts in, something that will prevent rust, whatever you like to use.
