Hi everyone need your advice I recently picked up an Arsenal SLR 1060r in 5.56 took her to the range had some ejection problems I believe it's related to the dust cover I tried to dust cover on my Sega on the SLR still had the same problem then I put on the dust cover to a polish kit build that I had at the range also and it ran fine anybody have any ideas what the problem with the original dust cover could be or if it's something else I was thinking about trying a extra power recoil spring first on the SLR see if maybe that helps when I take the disc cover completely off and shoot it it ejects fine it has a strong ejection with the Polish dust cover I'm not sure what's going on any help would be greatly appreciated thank you. New member from Ohio
SLR 1060R
- Thread starter Driver 49
- Start date
I would take this over to akfiles. the slr106 models had lots of issues. did you buy it new?
That must be super frustrating. I hate buying a used gun only to have to deal with getting it to work.
Older 106 are notorious for feeding issues, you can go on the akfiles and check by serial number if you are in the problem batch.
Most people have been able to get them running, some people just end up giving up on them and pass it on for the next person to deal with.
on the files you’ll find solutions to fixing your 106 as well, and what’s worked for others.
Older 106 are notorious for feeding issues, you can go on the akfiles and check by serial number if you are in the problem batch.
Most people have been able to get them running, some people just end up giving up on them and pass it on for the next person to deal with.
on the files you’ll find solutions to fixing your 106 as well, and what’s worked for others.
Similar threads
