Small varmint kills (the bastards!)

8D4BF7F7-D32E-4339-A3D7-59466AD14101.gif

Had a bit o’ time to make a gif of one of the above shots…
 
So far, the only disadvantage of the 22-250 vs. 204 for pdogs is that the barrel heats up waaaay faster (as expected). I just use a water-soaked towel wrapped around the barrel. Works well, looks dumb lol

Besides that, the recoil is a tad more and before the trip, I actually got slightly sore after 75rds of zeroing and 300/400/500 truing on steel. Didn’t notice it that day, but did the day after. 204…never.

Just call me Mr. Shoulder Puss™.
Barrel buring was one of the reasons I concisely to trade off the 22-250. Even still I’m happy with the trade but want the 22-250 back. It was a gift to myself when my time in the service was over .
 
View attachment 8729914
View today through the S&B 5-25 H2CMR reticle on the 22-250.

I was a big holdover type shooter but dialing with this reticle, the DTII+ turrets, and turret tape might change all that…
I’m a hold over guy to - as I’m primarily a hunter / varmit killer - almost never time to dial , and when there is - have to laze first cause the deer - coyote - pig woodchuck don’t come in at 50 yard increments .
Why I’m always trying new glass - to find reticles that match with my load and rifle - and many do alright - some do well a few even spot on - at the range past 500 I dial . In my AO a shot on game past 300 would be notable .
 
almost never time to dial , and when there is - have to laze first cause the deer - coyote - pig woodchuck don’t come in at 50 yard increments
That was exactly my argument! However, the use of turret tape has made dialing very fast. I used the regular Ballistic Tape, but the X version is taller.
1752893440807.jpeg


Tentatively, I’ve found that speed-wise between holdovers vs. dialing it’s a wash as I tend to forget the holdover once or twice after looking at my scope-attached range card while I’m juggling the LRF binos and refinding the critter in my scope.

Dialing: after lazing, I spin the turret to the correct colored hash (for example, I’ve written “3” above the mark for 300yds) and away I go to refind the pdog in the scope. If the target’s at 350, I glance at the scope-attached range card and dial that. I might even mark the 50yd increments on the tape as well.

What I’m getting at is I can’t forget what to dial as I do that immediately after lazing (I’m not THAT forgetful). When holding over I must keep a number in my head (mils or yards) during the whole refinding process.

Anyway, YMMV and I was quite a critic of dialing for pdogs before I tried the tape solution. Not saying I’m going all-dialing but I’ve surprised myself here.

For pdogs (or any small critter) dialing with a simple reticle sure helps you spot both the target and the next target vs. a Xmas tree, which kinda occludes little varmints sometimes.
 
Last edited: