Picked up quite a bit of 1x fired Hornady 308, realized I really don't need it. I'd say 90% is 1x fired, but I know I mixed up 40-50 2x fired in the batch after some load development. 100 pieces are from a gas gun but you really can only tell by a small scratch or two on the necks from ejection. Can keep these separated during shipping if requested.
All cases have been ran though a FL sizing die and wet tumbled. I think all brass is trimmed to 2.005 +/- 0.002, but will need to check that. I know two of the boxes I looked at were. As it's only 1-2x fired it has not been annealed, but I could always do that for a small fee before shipping as well.
*MTM boxes not included
SOLD
All cases have been ran though a FL sizing die and wet tumbled. I think all brass is trimmed to 2.005 +/- 0.002, but will need to check that. I know two of the boxes I looked at were. As it's only 1-2x fired it has not been annealed, but I could always do that for a small fee before shipping as well.
*MTM boxes not included
SOLD
Last edited:
