I have about 650-700 Fully Processed mixed LC brass. Its a Gallon ziploc full, weighed in around 9ish+ pounds. Average weight of 5 cases was 91-92 grains. 9ish pounds puts the number into the 650-700 cases area. I'm not counting it so don't ask lol.
Brass has been:
1. Wet tumbled
2. Resized
3. Trimmed to 1.74
4. Primer crimp reamed, not swaged (see pics)
5. Corn cob polished.
All brass is ONCE-fired, all AR15 use, no machine guns. It is mixed LC headstamp, but most of it appears to be newer, in the '12-'18 range.
It's all ready to load. I seated a primer just fine using an RCBS hand primer. Cases are not chamfered or deburred, but don't have sharp edges.
$150 Shipped
Brass has been:
1. Wet tumbled
2. Resized
3. Trimmed to 1.74
4. Primer crimp reamed, not swaged (see pics)
5. Corn cob polished.
All brass is ONCE-fired, all AR15 use, no machine guns. It is mixed LC headstamp, but most of it appears to be newer, in the '12-'18 range.
It's all ready to load. I seated a primer just fine using an RCBS hand primer. Cases are not chamfered or deburred, but don't have sharp edges.
$150 Shipped
Attachments
Last edited:
