So I bought some once-fired SSA 260 brass on here a couple years ago with the intention of running it thru my GAP10. Sold the rifle and am using Lapua in my 260 bolt gun so this stuff is redundant.
450+ pieces of 1x fired Silver State Armory 260 brass, stainless tumbled, FL bushing (.289") sized in Redding Type S die for a headspace at 0.000" on my Mo's comparator (corresponds to 1.630") primer pocket trued and flash hole deburred, trimmed to 2.030" on a Giraud trimmer. Corn cob polished then primed with CCI BR2 primers.
All 450+ (460?) Shipped ORM-D to you for $100. With about $19 in primers, $20 in shipping, this works out to about $.13 per piece.
450+ pieces of 1x fired Silver State Armory 260 brass, stainless tumbled, FL bushing (.289") sized in Redding Type S die for a headspace at 0.000" on my Mo's comparator (corresponds to 1.630") primer pocket trued and flash hole deburred, trimmed to 2.030" on a Giraud trimmer. Corn cob polished then primed with CCI BR2 primers.
All 450+ (460?) Shipped ORM-D to you for $100. With about $19 in primers, $20 in shipping, this works out to about $.13 per piece.
Last edited:
