• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

tsu45

Private
Full Member
Minuteman
May 15, 2011
783
290
111
T2AGAP
Standard Fill
MCS-DBM SHORT ACTION MINI CHASSIS (GEN 2)
TL3 Inlet (Should fit any LB/RP short action. Could fit a LB/LP by knocking down the left side with a mill. Gunsmith charged me $50 to do that on an MPA. Note that thumb shelf is on right side)
MTU channel
Orginally a 1" pad but changed by Manners to a shorter length. Updated LOP off a triggertech pictured below.
Black Forest camo (not usually available on standard fill)
Two right side flush cups
Area 419 ARCA rail installed by Manners. Don't remember exactly how many but more than the two standard attachment points on rail to prevent flexing.

Really good condition. Never shot a competition with it, mostly just dry firing. There are some marks on the 419 rail that I captured with the pics.

$800 shipped CONUS. Original was $1145.

image2.jpeg
image3.jpeg
image4.jpeg
IMG_4174.jpg
 
I have a Defiance left bolt right port that has the integral lug. Will my action fit ? Would I need to mill out the chassis for the lug and bed it?
 
I have a Defiance left bolt right port that has the integral lug. Will my action fit ? Would I need to mill out the chassis for the lug and bed it?

This has the gen 2 Manners mini chassis imbedded in the stock, so as long as it that Defiance is a short action Rem 700 footprint it should drop right in. It has a TL3 with an integral lug in it right now.
 
I have a Defiance left bolt right port that has the integral lug. Will my action fit ? Would I need to mill out the chassis for the lug and bed it?

Which Defiance do you have?
 
Is the action for sale by chance ? I would buy the stock as well if so.

Have two of them and don’t think I could stomach giving either up.

I have a 6.5x47 Lapua barrel shouldered for a TL3 I could work you a deal on to get that portion started.