Rifle Scopes Specific S&B 5-20 US Model

[Pusher591]

Looking for a US 5-20 in black with h2cmr or msr reticle with the DT/27 Mil turret. MSR reticle to suffice as well.

can only seem to find that in Ral8000 or pantone

 

[Slapchop]

They may not offer those two reticles in the 5-20 Ultra Short. According to their website, only 3 reticles are available for that scope. The H59, P4F and Tremor 2

 

[Pusher591]

They may not offer those two reticles in the 5-20 Ultra Short. According to their website, only 3 reticles are available for that scope. The H59, P4F and Tremor 2

Yeah I saw that too, but not too long ago a guy had one on here that had a h2cmr in it and it was black. May just be discontinued

 

[Slapchop]

I just look at B and H cause they usually a ton of em but couldn't find one there either. Good luck.

 

[SRPowah]

It must be discontinued, as I definitely have a Black H2CMR 5-20US.

 

[ICU22250]

Yeah I saw that too, but not too long ago a guy had one on here that had a h2cmr in it and it was black. May just be discontinued

That was a discontinued model, I know because I looked the exact scope you are referring to up...

 

[redneckbmxer24]

They should be able to do it, probably just not a stocking item but Euro Optic should be able to special order one for you. For black, illuminated, CCW DT MRAD your part numbers will be:

H2CMR:
673-911-932-F1-E8

MSR:
673-911-852-F1-E8


If you don't want either illuminated then change the first 3 of the part number to 873.

 

[Pusher591]

Nice work everybody!!! I’ll give Euro a shout and see if they can get it done.

 

[B-P-UU]

Nice work everybody!!! I’ll give Euro a shout and see if they can get it done.

Let me know what you find out.. interested in this as well.

 

[B-P-UU]

They should be able to do it, probably just not a stocking item but Euro Optic should be able to special order one for you. For black, illuminated, CCW DT MRAD your part numbers will be:

H2CMR:
673-911-932-F1-E8

MSR:
673-911-852-F1-E8


If you don't want either illuminated then change the first 3 of the part number to 873.

Thanks for the info.. which numbers designate the Mils per rev? I think there are a few different options to choose from..

 

[redneckbmxer24]

Thanks for the info.. which numbers designate the Mils per rev? I think there are a few different options to choose from..

The last two series in the part number designates the turret specs. F1-E8 for example is CCW MRAD DT LT MTC found on the 3-20US and 5-20US. There's different designations for CCW vs CW, MRAD vs MOA and all other variations.

I may be wrong but I believe on the US's the ST turret has been discontinued and they're all now the same DT LT MTC turret unless it's leftover stock which I'm sure plenty exists of.

If you're looking to single out the ST scopes, the ST turret still has 17mil on it which is a bunch and plenty for pretty much any use outside of using it on a magnum for ELR which I don't think most will be using this optic for. DT will of course have better resale because people think they NEED a feature they'll never use. If you find a deal on one snag it, you won't regret it.

 

[Lowlight]

If Mile High doesn't have it, odds are it's not available and would have to be ordered.