Gunsmithing Stock for Remington 700 sbr

[Alabama556]

Does anybody make a stock that would work with a Remington 700 short action with a 9.5 Douglas barrel? I need a stock that will let me screw my direct thread suppressor on.

Thanks

 

[chipsfan]

What about the MDT lss? Not a very long forend.

 

[Alabama556]

What about the MDT lss? Not a very long forend.

Thanks. I want a traditional style stock.

 

[236snipe29er]

How about an HS precision take off from a 700p LTR. Measures about 8 3/4 inches from the recoil lug to the end of the stock.

 

[Alabama556]

Thanks. I think that would work. I will have to measure my rifle.

 

[236snipe29er]

You may be able to trim an inch or so off the end of that stock if need be...not certain though?

 

[dddoo7]

I was under the impression that manners made an ultralight stock that had a shorter forend. I just looked and couldn't find it...but you might call them and see if they have one that would work.

 

[R Moran]

What about the Mcmillan Model 7 stock?

 

[Alabama556]

I talked with HS Precision yesterday and their stocks wont work. I have emailed Mccmillian and Manners to see if they could build one for me. I guess I should have cut it to 11 instead of 9.5.