Have never owned a supressor (this is my first). Thunderbeast ultra 7. Who has had success with the same load prior to running a can. Do you all work up a new load including ladder test with your supressor?
Thanks
Thanks
Supressor load change question
- Thread starter NorthWesterner
- Start date
You would be so better off just testing this yourself rather than seeking opinions. You never said if you are currently running a brake, or if you have to have the barrel threaded to accommodate the can.
We all have stories, and all barrels are different.
Myself, going from brakes to cans, I saw no diff, if there was any, on a couple my grouping improved. I did have marksman contour barrel with a tbac ultra on, when I slapped my magneto on it acted like a tuner and shot stupid accurate, going back to a brake solved my issues. I'm not qualified to answer just what I had going on. A POI shift is a given
We all have stories, and all barrels are different.
Myself, going from brakes to cans, I saw no diff, if there was any, on a couple my grouping improved. I did have marksman contour barrel with a tbac ultra on, when I slapped my magneto on it acted like a tuner and shot stupid accurate, going back to a brake solved my issues. I'm not qualified to answer just what I had going on. A POI shift is a given
I also run an ultra 7 and use the same load with and without it. I almost always shoot with the can on though.
My form 1 9 inch can groups just as well if not a tad better than just running a brake only
My buddy's TB BA 30 9 inch does the same. He works up a load with brake only using a magneetospeed when looking for a nose then just slaps the can on and adjusts for an point of impact shift. Test it and see what you get, good luck bud
My buddy's TB BA 30 9 inch does the same. He works up a load with brake only using a magneetospeed when looking for a nose then just slaps the can on and adjusts for an point of impact shift. Test it and see what you get, good luck bud
